Walker at Taylors

Das Jaeger · November 7, 2009, 07:54 AM

There is a Walker at Taylors right now for anyone looking for a new Uberti Walker , has small chip out of the bottom of grip , for $340 .....
New pollished grips are $38 also by the way . So you'd be looking at about $391 or so total ? Kinda high , but Taylors has good looking guns , the Gals there are great to deal with too .

I too have one Walker up to go , fired once , Immaculate Condition , With Custom Fiddle Back Black Walnut Grips , first $300 gets it , POSTAL MONEY ORDER ONLY , $14.00 Insured shipping , PM me if your interested .

Das Jaeger

TomADC · November 7, 2009, 09:57 AM

I'll take it and get a POSTAL MONEY ORDER on the way today.

Das Jaeger · November 7, 2009, 02:46 PM

Tom , would love ya to have it , for a Postal Money order this time

Cheers, Jaeger, its a fine Walker Tom , thats for sure .

missuramoss · November 7, 2009, 03:27 PM

Damn....just got back from the gun show and see this.....Allways late....my new theme song...congrats there Tom...not only a good lookin Walker...but nice grips too!!!!

TomADC · November 7, 2009, 03:32 PM

Quote:

Tom , would love ya to have it , for a Postal Money order this time

Cheers, Jaeger, its a fine Walker Tom , thats for sure .

I know I blew sent cashiers check instead of money order will not make the same mistake again..
Oh PM sent..

Tomahawk674 · November 7, 2009, 10:09 PM

I went to Cabelas today and they had several bp revolvers out that I asked to see, including a new Walker and Howdah. (They had virtually none over the summer)

I went to the "gun gallery", where I asked to see and hold a $12,000 original Dragoon. I have to say though, it had virtually no finish on it, and the barrel was woblely. I'm not quite sure I'd pay that much, but, it was the first time I hold a 12 grand gun...

missuramoss · November 7, 2009, 10:22 PM

Tom...yer in St. Jo...I'm assuming you went to the cabelas in Village
West...I held that same Dragoon a week ago and noticed the 12 grand price tag....almost looked like a wall hanger to me..If I remember right..it was a 2nd model?..Ever been to James Mercantile in Liberty?..they have some BP revolvers and supplies.

missuramoss · November 7, 2009, 10:30 PM

Oh...and did ya see the cased '49 pocket model there too?...veryyyy nice!!

Tomahawk674 · November 8, 2009, 12:51 AM

I was in that very Cabelas missuramoss. Yes I did see the pocket, but I didn't ask to hold it. That was going for 2k. I do like most of the guns they have in that gallery but none are in my price range.

One thing I find interesting is that the Uberti Walker they had could not cock without your hand aiding the cylinder to turn. This was the same case with a nother Uberti Walker from another store. What's up with that? do they require some action polishing/stoning before they can work properly? or do they need to be doused in oil?

----- Oh and I have gone to James Mercantile once, nice store, but I only need to buy lubed wads at Cabelas, and everything else I can get in St. Joe for cheap.

missuramoss · November 8, 2009, 01:34 AM

Hmmm...Thats the store I bought my Uberti Walker from...It functioned flawlessy from day 1....Interesting though...when I bought it..they only had 1 left in the display case, and I was told by the salesman that that particular cabelas wasnt gonna sell Walkers anymore...I didnt see one when I was there last week.

Was the one yer talkin about in the bargain cave...or out in the display case??

Tomahawk674 · November 8, 2009, 01:47 AM

It was in a glass display case, at the bottom, alongside the howda. It just wouldn't cock fully back. Same case with another I saw at a different store. Maybe the cylinder was dragging. I didn't mess with it much...

Das Jaeger · November 8, 2009, 09:17 AM

the price tag on that Walker at Cabelas $400 ! Say What !

I knew awhile back when chatting with Mr. Know It All Clerk at our Cabelas here they were going to discontinue the Walkers at Cabelas because lots of people returned them used aftter they realized that the loading lever would fall on some of them , thats why he said they were contemplating 86-ing them form thier line-up . When taking Pops into the Gun Librairy recently we checked out thier BP revolver offerings , they had four 1851 brass frame models, one steel frame 1860 and brass Buffalo model , thats it ! Way to represent supply and demand ? That scares me a little . People here are pretty lazy I guess , if you can't throw a cartridge in a gun , it doesn't sell here . You also won't find any BP guns period in our Pawnshops , i know some of the owners of them here and they just don't sell . Moral of the story , people are lazy and cheap

........

Tom , your flawlessly functioning right out of the box Walker will ship Monday

Enjoy Tom , your collection is getting large daily it appears , congrats

..
Not only great guns your getting , but all with Custom grips , bonus !

Jaeger

missuramoss · November 8, 2009, 02:01 PM

I hear ya Das...The cabelas here doesnt seem to intrested in BP revolvers or supplies...Their BP revolvers are wayyyy down in another aisle, prety far away from modern guns. And, their offerings are pretty slim also. Tom musta been there way before I was there..Cause they didnt have didly as far as revolvers go, let alone a Howda or another Walker. They use to have a pretty nice selection of replica Hawkens and other makes of BP rifles..but they too, are dwindling. Even their selection of round balls and powder are slim it seems lately.

They do have a ok selection of supplies I guess....if ya dont mind takin out a second mortgage on yer house to buy them...or pay the sales tax on any revolver ya buy there...ok...I'm gonna stop bitchin now...but it really does seem as though cabelas is slowly waning away from the blac powder market...at least ways here they are...

TomADC · November 8, 2009, 03:24 PM

Looking forward to a range trip to shoot some of these. We don't always have enough range officers to open the pistol range, so I have volunteered to take the training so on those days I can opened that range, I'll still do a day or to a month, if there are enough on the range that day the RSO's can shoot.

Tomahawk674 · November 8, 2009, 06:36 PM

Missuramoss, I was at Cabelas yesterday, that's when they had the revolvers there. It was in the summer when they had close to nothing. Aside from the Pietta standards (1851, 60, 61, 58) they had the 58 in 2 barrel lenghts in stainless.

You may want to peek in if you're around the area.

November 7, 2009, 07:54 AM	#1
Das Jaeger member Join Date: July 4, 2009 Location: Northwest USA Posts: 1,417	Walker at Taylors There is a Walker at Taylors right now for anyone looking for a new Uberti Walker , has small chip out of the bottom of grip , for $340 ..... New pollished grips are $38 also by the way . So you'd be looking at about $391 or so total ? Kinda high , but Taylors has good looking guns , the Gals there are great to deal with too . I too have one Walker up to go , fired once , Immaculate Condition , With Custom Fiddle Back Black Walnut Grips , first $300 gets it , POSTAL MONEY ORDER ONLY , $14.00 Insured shipping , PM me if your interested . Das Jaeger Last edited by Das Jaeger; November 7, 2009 at 08:28 AM.

November 7, 2009, 09:57 AM	#2
TomADC Member Join Date: July 13, 2009 Location: Southern CA Posts: 448	I'll take it and get a POSTAL MONEY ORDER on the way today. __________________ U S Navy Retired, Lifetime NRA Member

November 7, 2009, 02:46 PM	#3
Das Jaeger member Join Date: July 4, 2009 Location: Northwest USA Posts: 1,417	PM sent Tom , would love ya to have it , for a Postal Money order this time Cheers, Jaeger, its a fine Walker Tom , thats for sure .

November 8, 2009, 09:17 AM	#12
Das Jaeger member Join Date: July 4, 2009 Location: Northwest USA Posts: 1,417	Did Yall Notice the price tag on that Walker at Cabelas $400 ! Say What ! I knew awhile back when chatting with Mr. Know It All Clerk at our Cabelas here they were going to discontinue the Walkers at Cabelas because lots of people returned them used aftter they realized that the loading lever would fall on some of them , thats why he said they were contemplating 86-ing them form thier line-up . When taking Pops into the Gun Librairy recently we checked out thier BP revolver offerings , they had four 1851 brass frame models, one steel frame 1860 and brass Buffalo model , thats it ! Way to represent supply and demand ? That scares me a little . People here are pretty lazy I guess , if you can't throw a cartridge in a gun , it doesn't sell here . You also won't find any BP guns period in our Pawnshops , i know some of the owners of them here and they just don't sell . Moral of the story , people are lazy and cheap ........ Tom , your flawlessly functioning right out of the box Walker will ship Monday Enjoy Tom , your collection is getting large daily it appears , congrats .. Not only great guns your getting , but all with Custom grips , bonus ! Jaeger

November 8, 2009, 03:24 PM	#14
TomADC Member Join Date: July 13, 2009 Location: Southern CA Posts: 448	Looking forward to a range trip to shoot some of these. We don't always have enough range officers to open the pistol range, so I have volunteered to take the training so on those days I can opened that range, I'll still do a day or to a month, if there are enough on the range that day the RSO's can shoot. __________________ U S Navy Retired, Lifetime NRA Member

November 7, 2009, 03:27 PM	#4
missuramoss Member Join Date: March 27, 2009 Location: The great state of Missoura Posts: 72	Damn....just got back from the gun show and see this.....Allways late....my new theme song...congrats there Tom...not only a good lookin Walker...but nice grips too!!!!

November 7, 2009, 10:09 PM	#6
Tomahawk674 Member Join Date: December 19, 2007 Location: St. Joseph, MO Posts: 329	I went to Cabelas today and they had several bp revolvers out that I asked to see, including a new Walker and Howdah. (They had virtually none over the summer) I went to the "gun gallery", where I asked to see and hold a $12,000 original Dragoon. I have to say though, it had virtually no finish on it, and the barrel was woblely. I'm not quite sure I'd pay that much, but, it was the first time I hold a 12 grand gun...

November 7, 2009, 10:22 PM	#7
missuramoss Member Join Date: March 27, 2009 Location: The great state of Missoura Posts: 72	Tom...yer in St. Jo...I'm assuming you went to the cabelas in Village West...I held that same Dragoon a week ago and noticed the 12 grand price tag....almost looked like a wall hanger to me..If I remember right..it was a 2nd model?..Ever been to James Mercantile in Liberty?..they have some BP revolvers and supplies.

November 7, 2009, 10:30 PM	#8
missuramoss Member Join Date: March 27, 2009 Location: The great state of Missoura Posts: 72	Oh...and did ya see the cased '49 pocket model there too?...veryyyy nice!!

November 8, 2009, 12:51 AM	#9
Tomahawk674 Member Join Date: December 19, 2007 Location: St. Joseph, MO Posts: 329	I was in that very Cabelas missuramoss. Yes I did see the pocket, but I didn't ask to hold it. That was going for 2k. I do like most of the guns they have in that gallery but none are in my price range. One thing I find interesting is that the Uberti Walker they had could not cock without your hand aiding the cylinder to turn. This was the same case with a nother Uberti Walker from another store. What's up with that? do they require some action polishing/stoning before they can work properly? or do they need to be doused in oil? ----- Oh and I have gone to James Mercantile once, nice store, but I only need to buy lubed wads at Cabelas, and everything else I can get in St. Joe for cheap.

November 8, 2009, 01:34 AM	#10
missuramoss Member Join Date: March 27, 2009 Location: The great state of Missoura Posts: 72	Hmmm...Thats the store I bought my Uberti Walker from...It functioned flawlessy from day 1....Interesting though...when I bought it..they only had 1 left in the display case, and I was told by the salesman that that particular cabelas wasnt gonna sell Walkers anymore...I didnt see one when I was there last week. Was the one yer talkin about in the bargain cave...or out in the display case??

November 8, 2009, 01:47 AM	#11
Tomahawk674 Member Join Date: December 19, 2007 Location: St. Joseph, MO Posts: 329	It was in a glass display case, at the bottom, alongside the howda. It just wouldn't cock fully back. Same case with another I saw at a different store. Maybe the cylinder was dragging. I didn't mess with it much...

November 8, 2009, 02:01 PM	#13
missuramoss Member Join Date: March 27, 2009 Location: The great state of Missoura Posts: 72	I hear ya Das...The cabelas here doesnt seem to intrested in BP revolvers or supplies...Their BP revolvers are wayyyy down in another aisle, prety far away from modern guns. And, their offerings are pretty slim also. Tom musta been there way before I was there..Cause they didnt have didly as far as revolvers go, let alone a Howda or another Walker. They use to have a pretty nice selection of replica Hawkens and other makes of BP rifles..but they too, are dwindling. Even their selection of round balls and powder are slim it seems lately. They do have a ok selection of supplies I guess....if ya dont mind takin out a second mortgage on yer house to buy them...or pay the sales tax on any revolver ya buy there...ok...I'm gonna stop bitchin now...but it really does seem as though cabelas is slowly waning away from the blac powder market...at least ways here they are...

November 8, 2009, 06:36 PM	#15
Tomahawk674 Member Join Date: December 19, 2007 Location: St. Joseph, MO Posts: 329	Missuramoss, I was at Cabelas yesterday, that's when they had the revolvers there. It was in the summer when they had close to nothing. Aside from the Pietta standards (1851, 60, 61, 58) they had the 58 in 2 barrel lenghts in stainless. You may want to peek in if you're around the area.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode