9mmepiphany
Moderator From northern california
- Joined
Latest activity Postings Images Media About
-
-
9mmepiphany replied to the thread Primers at the local Academy sports.Why spend that much when you can get Fiocchi SPP for $62/k ($375/6k) including shipping and HazMat from American Reloading -
9mmepiphany replied to the thread Chamfering vs flaring/crimping for 9mm?.If you're using a M-profile expander and getting a trumpet shape at the case mouth, you have you die set too deep. The whole point of...
-
9mmepiphany replied to the thread Powder for Multiple Cartridges.Yes, I remember reading that and filed it away in some recess of my brain. When increasing the charge for my last loading, it took...
-
9mmepiphany replied to the thread Powder for Multiple Cartridges.He's an engineer who works for Intel...he reads
-
9mmepiphany replied to the thread Powder for Multiple Cartridges.I'm just lucky that I've use equipment from all the manufacturers I can just imagine his eyes glazing over as i explained adjusting and...
-
9mmepiphany replied to the thread Powder for Multiple Cartridges.I wouldn't say cost is no problem or I would have steered him toward a Mark 7 Apex-10 so he could have one station for each die. Even...
-
9mmepiphany replied to the thread Powder for Multiple Cartridges.Just a quick glance at Midway shows the seating die as $32 and the click micrometer as $82...$114; so about the same...but the red top...
-
9mmepiphany replied to the thread Powder for Multiple Cartridges.You're further along than we are. He just got the bare press (reconditioned 6PP) and researching needed accessories, So far his big...
-
9mmepiphany replied to the thread Chamfering vs flaring/crimping for 9mm?.Neither of those issues are really exclusively a "flaring" problem. Your issues as listed 1. unequal expansion due to differing case...
-
9mmepiphany replied to the thread Best Speed Loader for Glock Mags?.It isn't much better than the magazine loader that came with your Glock. The ones for loading .22LR mags actually show some advantages...
-
9mmepiphany replied to the thread Powder for Multiple Cartridges.I noticed that also. The first five pounds of 244 I bought was from Midway who was Clearancing out 1lb bottles at under $25 each. The...
-
9mmepiphany replied to the thread Powder for Multiple Cartridges.That has always been my feeling also. The only cartridge I still use LPPs in a .45ACP in Starline brass in my S&W 625...because...
-
9mmepiphany replied to the thread Powder for Multiple Cartridges.Thanks all for sharing your experiences Sounds like I'll be going with my first inclination of starting him with BE-86, since I already...
-
9mmepiphany reacted to PO2Hammer's post in the thread How Do I Use This Thing (FA Brass Tumbler) with
Wow.
I like a little mineral spirits in my walnut media. Keeps it dust free, I can run it topless, and the cases come out with just a little... -
9mmepiphany reacted to LiveLife's post in the thread How Do I Use This Thing (FA Brass Tumbler) with Haha.
But you should really put on a shirt though ... in case neighbors happen to walk by ... :)
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…