Recent content by a2x4bbl

Excellent info . Thank you

Holosun SCS for Glock . I milled the slide . I made the comp as well , 304 stainless. And I kept the factory sights as well . I have all the A2 MF pistols .

Parker Mountain Machine makes comps for PO7/PO9 . Some of the nicer ones I’ve seen as well as a lot of other nice pieces. CZ is one of the more complex slide profiles .

Thank you . I made the comp , it’s 303 stainless . I milled the slide as well . It was a suppressor ready model so it came with a threaded barrel and suppressor height sights but the rear sight is a Glock Trijicon suppressor sight .

After the Cajun Gun Works goodies DA is 7 1/2 SA is 3 with a very short reset . But numbers don’t describe the improvement in smoothness .

Went with VZ . Thin and feel great .

Thank you . First full build , definitely a learning process. Many things I will do different next time . I’m paying close attention to all the fixtures that you make .

Ready for test fire . Then final sanding ( lots of sanding ) before off for some kind of finish . Trigger came out at a little under 3 lbs .

Big fan of Novak sights , really Novak anything.

You’re going to have to do your homework on your specific red dot that you choose and the pistol you choose. For instance the RMR/SRO screw mounting holes are too wide for 1911/2011 and Hi-Power . So you have to use a plate . The RMR has to have a sealing plate but not the SRO . Not a problem...

Well , one side is done . Not as simple as I thought it would be . My amateur skill level and 55 year old mill probably doesn’t help .

Just my opinion , disclaimer out of the way . What you’re describing you don’t like is striker fired pistols in general. You can improve them some , but it will never be what a 1911 trigger is capable of . Or a revolver single action trigger is capable of . Note capable of . The reason is the...

Definitely one of the better striker fired triggers .

Personally I like the sights . Zero problems with any of them . Not much aftermarket support. So it’s do it yourself or make it yourself.