Lol. Primer and stuck case taken care of.
I resized empty cases that were already sized, NOT loaded cases. But they were primed.
Just using calipers inside jaws, my cases measure .220. So I have .004" ish neck tension,, a least at the top of the case..
The new starline that supppsedly don't...
2 hours of my day off, no rounds loaded, stuck case with live primer, and a few questions.
Started loading 223 last year. Tried a couple different bullets and powders, finally got a fair amount of brass prepped and decided this was the weekend to load up 500 of one of the projectiles I had a...
The Hornady 62 fmj ran good from 25.5 to 26.8g of cfe 223:
62 fmj hornady cfe223 25.5 cci 41 ruger 16" 5.56 - 2575fps
62 fmj hornady cfe223 26.8 cci 41 ruger 16" 5.56 - 2731fps
CFE worked ok for the 62gr I loaded up. No better or worse than the 335.
Need to find the time to see how the rmr 69gr do.
Sorry, no 55gr data to report!
Perfect timing! I've got 5 groups of 5 loadings of the same combo sans primer and brass brand ready to test this weekend.
I'll post my results if I can get an acceptable format.
You guys are horrible.
Forcing me to look for new guns and & new caliber to load.
That's the story I'm telling my wife anyway!
Glocks and s&w revolvers are my favorites, so I'll need one of each in 10mm now...
My Nikon monarch 2x's have had no issues with lots of full power loads. They can still be found.
Otherwise the ultradot mentioned above or vortex venom have both held up well for me.
I stay under 100 yards so it may not apply, but fixed 2x works at my max range.
My groups are a bit better with the magnification than with my ultradot or vortex venom with 3moa dot. But all are deer moa and the dots are much lighter and quicker.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.