-
-
Stevenvalleyky replied to the thread Possible short throat on AR10 or maybe Im crazy.Yes just a light crimp. Never crimped rifle loads before but started doing it for both gas guns. I imagine Im just contacting the lands... -
Stevenvalleyky reacted to 243winxb's post in the thread Possible short throat on AR10 or maybe Im crazy with
Like.
TO much crimp may bulge the shoulder, causing this. If crimping? The COL being to long is a better guess. -
Stevenvalleyky reacted to silicosys4's post in the thread Possible short throat on AR10 or maybe Im crazy with Like.
Drop the bolt on an empty case with a bullet seated only part way. Extract and measure. Then you'll know how your OAL looks for that...
-
Stevenvalleyky reacted to Okie_Poke's post in the thread Possible short throat on AR10 or maybe Im crazy with Like.
If you had to mortar a round to eject it, I’m going to guess you’ve got bullets seated too long. Just because you are under SAAMI max...
-
Stevenvalleyky replied to the thread Possible short throat on AR10 or maybe Im crazy.I do that with a cut case on my bolt guns to find the distance to the lands, just havent tried it in the AR10. Everything functioned...
-
Stevenvalleyky replied to the thread Possible short throat on AR10 or maybe Im crazy.I load tons of 308 for bolt guns but this is my first for a gas gun. Im currently running them at almost min OAL and what appears to be...
-
I recently purchased my first AR15 and first AR10 after only owning only bolt guns for 30 years. I took the new AR10 out to shoot for...
-
-
Stevenvalleyky replied to the thread Mounting a 34mm scope on an AR10.Not likely Ill shoot this one far enough to run out of elevation in that 34 mm tube. Ill definitely need more elevation when I finally...
-
Stevenvalleyky replied to the thread Mounting a 34mm scope on an AR10.Is that a bubble level on the back of that riser? Where would a guy get such an animal?
-
Stevenvalleyky reacted to Txhillbilly's post in the thread Mounting a 34mm scope on an AR10 with Like.
If you're wanting to use those rings, just buy a 1/2" riser to attach to the top of the upper. I run them on all of my AR's, as I hate...
-
Stevenvalleyky reacted to Varminterror's post in the thread Long Range Rifle/Scope/PRS question(s) with Like.
That’s the new one. I’m driving now and can add one in a bit, but there are pics of my Havak PH1 on here all over. I have the hunting...
-
Stevenvalleyky posted the thread Mounting a 34mm scope on an AR10 in Long Gun Accessories and Optics.I need recommendations for good rings or a mount for a 34mm scope tube with a 50mm objective. I originally bought an Arken SH4J to put...
-
-
Stevenvalleyky replied to the thread What .308 BA would you buy if you had a $2000 budget for gun and optic?.Ill go different than others and say get a 1st gen ruger american or savage axis and spend more on glass. The cheapest bolt guns now are...
-
Stevenvalleyky reacted to mm93's post in the thread Decided to start Annealing - Here's my setup with Like.
No, brass is not like ferrous metals, and it doesn't matter if they air cool, or drop into cool water. They'll still be soft. Dropping...
-
Stevenvalleyky replied to the thread Decided to start Annealing - Here's my setup.I also now do my annealing with the lights off and just a small amount of background light to see to put the case in the drill and put...
-
-
Loading…
-
Loading…
-
Loading…
