My dad has a Marlin model 60 that has the bolt stuck open. He shoots the bird shot out of it for pest control. I know these rounds do not have much power and dont cycle the bolt on a semi auto. Any idea what would cause the bolt to get stuck open? Anything look off in the picture?
Marlin Model 60 Bolt Stuck
- Thread starter ldlfh7
- Start date
- Status
NIGHTLORD40K
Member
Can you get a better shot of the action angled down into the opening? Early M60s have a 2-peice feed throat held together with pins which can seperate and cause issues.
Could be some debris in there jamming things up too.
In any event, these are easy to dissasemble, and the problem will likely present itself if you remove the action from the stock.
Could be some debris in there jamming things up too.
In any event, these are easy to dissasemble, and the problem will likely present itself if you remove the action from the stock.
ogree
Member
Are you sure the bolt handle wasn't pushed in while pulling the bolt to the rear ?
That is how they function, pull outward on the bolt handle.
That is how they function, pull outward on the bolt handle.
sparkyv
Member
Catpop
Member
Yeap old savage 06 was same way.
- Status
