GET YOUR MONEY TOGETHER!!!!

Status
Not open for further replies.
And if you are prone to breaking your tools, Harbor Freight offers lifetime "no questions asked how you broke it" warranty on their hand tools
Junk is still junk, even if they will give you a new one. If you use tools hard, like for a living or a lot as an amateur (I have done/do both) you don't buy from HF. A tool you might use a couple of times a year? Sure, but something you will use every day, nope. Not only because it might break, but because the better stuff makes jobs easier.

A press you expect to use a lot for hopefully a lifetime? You buy the best you can afford.
 
Dang, NOW you tell me ... may have to upgrade to 750.

Would be interesting to see what the OAL variance is for 650 vs 750.

Yeah read rfwobby's #3.....

The New Dillon XL-750 Press
Features and Comparison to XL-650

As of about August 5th, the XL-650 press no longer appears on the Dillon Precision web site and the XL-750 has taken its place. But what is the difference and how will this affect your reloading bench?

The new Dillon XL-750 press does have several significant changes compared to the XL-650 press, but its basic operation hasn't really changed. It still has five Stations and each station still performs the same function. Here is a short list of the changes.

1) Primer System: The most obvious change is the primer system, which is based on, but not identical to, that of the RL?550 press. Indeed the primer bar is longer (4.75" versus 4.5" for the 550) and most parts cannot be interchanged between the two systems. One handy feature is that the Primer System is attached to the press via two studs and thumb nuts … so you don't need a hex wrench to remove it.

2) New Platform: Modifying the Platform Assembly was necessary due to the change of Primer System. But it looks like Dillon took advantage of the opportunity to make a few additional changes. The Index Pawl has been moved from Station 3 to Station 5 … requiring that the Index Ball be moved from between Stations 4&5 to between Stations 3&4. This design change places the Index Pawl ahead of the cam of the new Index Ring, so the plastic between is under compression instead of under tension during indexing … which should yield less breakage. The Indexer Ring is not interchangeable with the XL-650 Indexer Ring.

3) Rolling Wheel Index Block Assembly: The Index Block now features a Rolling Wheel that smooths shell plate indexing. Although it is a simple solid wheel and not an actual ball bearing, it should significantly smooth indexing. The new assembly also incorporates a spring loaded Platform Support Post. It appears that this Post has two functions; 1) It supports the platform from tilting due to the upward force of the primer punch, and 2) It helps return the platform to the neutral position after primer seating. The XL-750 Index Block assembly cannot be retrofitted to an XL-650, but a version that is XL-650 compatible is in the works.

4) Zerk Fittings on Linkage: The upper and lower Link Arm Shoulder Pins have Zerk fittings to make proper lubrication easy. Technically speaking, this isn't new as it was incorporated into the XL-650 a couple of years ago. But there are many of us with older XL-650 presses that may not have heard about it and aren't aware that, YES, it can be retrofitted onto older XL-650 presses. In fact, Dillon has it in kit form that includes everything you need for $51.95. **

What hasn't changed? Well, a LOT! The XL-750 uses many of the same parts and accessories as the XL-650, including...
• Dies
• Toolheads
• Caliber Conversion Kits
• Quick Change Kits
• Powder Measure
• Powder Check
• Strong Mount
• Bullet Tray
• Bullet Feeders
• Electric Case Feeder
• Low Powder Sensor
• Roller Handle
 
Yeah read rfwobby's #3.....
No, I am interested in actual OAL "variance" between 650 and 750. I wonder if the 750's OAL variance is less than 650 as I asked on this new 750 thread - https://www.thehighroad.org/index.php?threads/dillon-xl-750-first-impressions.855003/#post-11207333

Ever buy tools you’ve never used because they [were] cool and you “might need that one day”?

*raises his hand*
* Also raises hand * Guilty, guilty ... :oops:

< Looks at color borescope camera that's still in the box ... along with other tools still in boxes like Bosch cross line laser level ... Shhhh, don't tell my wife >
 
Last edited:
Last edited:
I’ll do you one better, have you bought tools you hope you never have to use?

Yes, and some replaced by better tools, that I hope I never have to use again.

I have three, for sure that I hope I never have to use for the purpose I bought them....ever. Those I conceal-carry......
 
Well that is one of the new features of the 750, seriously. The 750 has shell plate tilt equalized compared to the 650....one of the reasons they "modified" the 650 casting.....so there you go. I fixed my own on my Pro 2000.
GWS, please check your forum inbox.
 
The manual is online now. https://dilloncdn.com/manuals/dillon-xl750-manual-english.pdf

They obviously changed the platform, the shell plate still looks 650. Looks like they went with a little different version than the “paper clip” retainer the 550 has but not the Allen adjustable locator for station 2.

E5DD8030-2A50-4429-A4F8-A2EC5EFC16EB.jpeg

Depending on how you have them adjusted, the 550 left, can beat their others for consistency. Wonder why they took its priming system and not the concept of riding the case on the platform vs “in” the shell plate.

68989185-2B8E-432A-86D3-E4B6C8D35800.jpeg
 
Status
Not open for further replies.
Back
Top