Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
You are using the old High Contrast theme. We have installed a new dark theme for you, called UI.X. This will work better with the new upgrade of our software. You can select it at the bottom of any page.
I purchased the Sig Tac Pac a while back. Ships with 3 X 12 round mags. Loved it, then I found the Wilson Combat replacement grip frames, bought one. I made a perfect carry gun, more perfect. Highly recommend that grip frame. Put a Mag-guts kit in my carry mag, 14+1 onboard. Better palm...
In a Colt Combat Elite, the only profile I couldn't get to feed reliably was the 200g RNFP. No matter OAL, plunk test etc. pistol just didn't like them. You can see in my pic my top 3 favorites to cast/shoot.
I only use cast.358 for several pistols, zero leading/cycling/accuracy issues (well, not counting my accuracy issues). I like not having to size differently for 9mm and.38 spl/.357 mag.
I cast and coat my own. Back to casting pot they go! If I were buying them, not sure I'd enjoy smashing them with a hammer either. Every once in a while a batch gets "contaminated" or temps are off/time etc. and the coating looks good, but comes off like an egg shell when the hammer drops.
Are these the new invisible Rem 7.5 Bench SR primers? I use zip bags for load development. I keep an index card in the bag, shoot them, make notes and place the brass back into the corresponding baggie. Makes for easy case inspection/load evaluation. Other wise 50/100 round ammo boxes or...
Maybe the "After" cases were annealed then photographed? This just seems like extra work to me. Maybe if it were some wildcat cartridge or rare H&H caliber, because of necessity. ALTHOUGH, I totally get the curiosity angle. Stay safe brother.
Looks like that brass is driving way too far into the die body section that applies crimp. Back out the die, and raise seater stem all the way (just to be safe). Place belled case on the ram, raise ram to full extension, then lower die body to just contact belled case. Taper crimp is set from...
I like AA2230 for 55g stuff. I find it's getting harder to find. Had some W748 so I just loaded up a few and I'm ready test. I'm no benchrest guy, just a plinker. My bulk loaded .223 loads probably will never be better than 2-3 MOA. I like ball powders to load from a Lee Pro Disc powder...
I just melted down 160 pounds of clip ons and pure. It's been a while, maybe 5 yrs since my last smelt. One word of advice, NEVER let your face get directly above the pot. Cover up your face and wear long shirts and pants with leather boots and gloves. I always wear a hat too. I'm going to pick...
None of the available powders are going to get you the veocity that those BB +P rounds generate. My vote is buy a few boxes and carry them. $1.40 a round is steep for sure, but they'll be worth many times that if you need them.
vaalpens,
Odd, I only checked the Alliant info on the .357 Mag 158g cast RNFP, no Unique. But its there on the Lead SWC, weird. Could the charge for the Speer SWC be so low because those are soft, pure lead with powdered lube?
Thanks,
Bula
Not sure I'm clear on this one. Handloader #302 from June 2016 has .357mag 150g SWC loads from 7.0g to 8.0g for "Classic Guns". Do you think that 7.5g may not be safe? Those listed loads were a little hotter (~1200-1270 FPS) but for a little lighter bullet, than I am looking for. I plan on...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.