Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
You are using the old High Contrast theme. We have installed a new dark theme for you, called UI.X. This will work better with the new upgrade of our software. You can select it at the bottom of any page.
I know this is going to be unique for everyone. Recently I inherited some money from a family member who was very pro-gun. I want to take about/up to $2k of it and spend it on something memorable. I’ve already got all my basic uses covered currently, with mostly basic mass produced firearms...
I’m not sure why it wouldn’t take .358 bullets. It has the same land and groove spec as .357 Magnum. It seems like a gunsmith could lightly ream the throat and have a fully .357 spec muzzle end of the chamber. I wouldn’t doubt that 0.001” of slop was already in most mass produced factory...
How set are you on the rimmed case? While it would require new brass, 350 legend is using the same bullets and can be loaded with similar loads. Bolt rifles for it are much more available.
Just paper punching, of the group the 6.5CM is probably your best bet. Good, fairly inexpensive ammo. Relatively low recoil, good ballistics for longer shooting.
All options are a compromise in some way, shape, or form. The 6.5 CM seems to be the pick of best set of compromises for the...
It’s not hype at all. It’s a great jack of all trades right now. It does a lot well. But it’s nothing revolutionary (though factory rifles in fast twists is arguably evolutionary). The most revolutionary part is that you can find quality factory ammo for $1/round. It’s not much different...
It is a better Jack if all Trades round than most others. It’s easy to shoot in hunting rifles and has good hunting bullets. It has great performance at distance relative to most short action options. And it is the current popular round for the gun mags.
It’s not going to replace .308 or...
There is a lot of emotion tied into this thread. Seems to me the more emotional the response, the less fact/logic tied to it regardless of which you like.
Let’s be honest, they are both budget rifles being mass produced. Some will be amazing, most will be average, and some will be duds. Pick...
It doesn’t sound like there is a great purpose for this rifle. Without having a destination I would either trade it, sell it, or keep it as is. If you had a need that this could fill, then change it to meet that need.
If that’s what you’re doing, do what makes you comfortable. I guess I simply don’t hang around the crowd that paddles for four days in and four days out. I’d be worried more about how I’m going to get the animal out on a canoe that I paddled 4 days in. If you are doing an extreme and want the...
To me, I don’t see a situation where I would know the scope broke and swap to irons. I will either not know the scope broke and shoot with a broke scope, or I’m probably done for the day. But I’m not trophy hunting and I don’t mind calling it a day if something is visibly wrong with the scope...
I’m just not demanding enough on hunting style 22lr rifles to see a difference from an average solid wood stock to a great synthetic stock. I have no experience with Tikka synthetic stocks and if they are solid, it’s a functionally good choice. I have had too many crap plastic stocks that flex...
It seems to do a lot right but I’m sitting pretty flush with rimfire rifles. It will need to do very well to be a better buy than a CZ455. I think that comparison is going to get made rather frequently.
Inherent accuracy seems a bit of a myth. These chamberings have vastly different bullet design, quality control, velocities, etc. Certainly some are better suited to longer ranges. I’d guess if you put them all in a perfectly calm environment, the ones with the greatest quality in...
You can buy one ar500 full size silhouette for the cost of a DIY camera setup. Maybe two if you get a deal on shipping or have a local store selling them. A camera is $10-$15, transmitter is $15, receiver is $15, and a monitor is $30. Even if you bump the quality a little, a full camera setup...
It's no different trying to shrink a 8MOA group to 3MOA than it is to shrink a 6MOA group to 1MOA. Especially of you can have a known good shooter put a few groups down range to give a baseline to shoot for. Starting with better components makes it easier to see when an equipment issue...
I don't think a dedicated longneck range rifle is a great new guy choice. If you are going down that path, I'd argue volume shot is more important than the difference down range in .308 and 6.5mm or 6mm rounds.
When new, I'd suggest shooting larger quantity of less accurate ammo over smaller...
If all you are doing is shooting paper/steel at 600+ yards then .308 may not be ideal. But it offers cheaper ammo when you want to play around which isn't the case of the others.
The number of AR10 type rifles in .308 far outnumbers anything else making rifle availability in a semi auto much...
It always has been and always will be shot placement. Good hunting bullets will take deer fine with either with a good shot placement. If I had both with proper bullets, it would depend on the hunt/situation at hand. I've had really good luck with .223 on pigs inside 200 yards and with good...
Budgets are drastically different. What may be expensive to some is pocket change to others. While I don't categorize myself as poor, I also don't fit the rich category either. I can see both sides. A bottom priced rifle or shotgun made today is going to put food on the table. At the same...
To me, it's a good value and does more than what it's price point suggests. It's not an elite quality rifle but I haven't seen a thing at even twice the price that was equal to it. I don't own one but the ones I've shot have been reliable and accurate. Not the most refined rifle but...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.