Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
You are using the old Black Responsive theme. We have installed a new dark theme for you, called UI.X. This will work better with the new upgrade of our software. You can select it at the bottom of any page.
I've dropped my loaded P3AT twice from about 7.5' directly onto a hard tile floor! :what: Actually it slipped out of the cheapo nylon holster I'm using, so technically I didn't fumble the actual gun. :evil: Hit once smack almost vertical on the rear of the slide. Put a little dent into the...
Shell deformation is easy to avoid. Leave the Bolt in the open position with mag in by using the BHO lever. You can't load +1 like this, but there's no pressure on the second shell this way.
Mags DO NOT need to be seated hard with the bolt open. The BHO is tricky, but when loading I use...
Why not? It'll dry quicker and more thoroughly hopefully. Myth Busters did a segment on that and ammo won't cook off until it reaches 450 or so. I say dry it at 150-200 for several hours. Just don't have small hands around that could change the temp on you!
OP's postulation of a perfect trading world might work, IF WE LIVED in a perfect world. Problem is, we aren't, and we are smack in the middle of the flux. People ARE losing jobs due to offshoring, etc. People in manufacturing working the line for 20-30 years are being let go with a thank you...
Why the 20? Kick almost as hard as the 12 due to the light barrel, harder to find parts to convert. I'd go 12, or if you want light, get the 410. More parts for it.
Here is the operative statement of that entire lot of gibberish.
Of course gun crime will reduce temporarily. Until the criminals get theirs by other means. They conveniently used a very short period following the ban when things are in disarray.
From what I've read, stick with the metal framed Kahr's. Supposedly less problems. I have an MK-40 (metal) that's been great and I would have no problems CC'ing it. Have never tried their polymers, so I have to reserve judgment.
I love DT in most of my guns, even my little P3AT. However, for some reason the 40 is soo hot that it caused FTF's in my Kahr MK40. Almost flew out of my hands once! A couple mags of the stuff and I was done. Just too hot for the little gun (or me!). I would NOT try it in the PM40! The DT...
Somehow, the bulk of the mass shooting didn't START until AFTER gun bans. Somehow the gun ban idiots don't understand why. Keep :banghead: hoping for a different outcome. :barf:
May have been posted before, but this version is pretty nice. All parts are labeled. Pretty cool version. Shows a nice firing demo as well after assembly.
http://www.youtube.com/watch?v=E6SmlOEzNBs
I think i saw a graphic in an old thread on this subject, possibly on a different site.
Anyway, when chambering a round directly and slamming the slide forward, the extractor HITS the rear of cartridge and has to deflect out and around the rim to engage the groove. Now take a look at your...
NEVER a GOOD idea in ANY firearm. You are stressing the extractor and spring, and could easily break off the hook. When the round loads from the mag, it slide up INTO the extractor. The hook doesn't ride up over the cartridge rim when sliding into battery each time. Just because you've...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.