Search results for query: *

I own a sig 226 in 9mm. Will the x-change kits fit on it? The information I have seen indicates the kits fit on the 22 pistols. Is the 9mm sig 226 frame different from the 22?

I just purchased a model 41 with a seven inch barrel and muzzel brake, can anyone help date the year of manufacture? Serial number is A1918XX. Any help is greatly appreciated!

Is it ok to use a small magnum primer in 9mm? I am currently using a very mild load of 3.9 grains of HP38 with a 125 grain lead bullet. I ask because I have two thousand magnum primers and do not load any magnum cartridges.

So your saying it is safe to use 200 grain data with a 180 grain bullet?

I have 2000 180 grain lead semi-wad cutters and would like to load them in 10mm and 40 cal. but the lyman catalog I have only lists 175 grain lswc. Is it safe to use 175 grain data with 180 grain bullets if minimum charges are used? I currently use bullseye, WFS, and Win 231 when reloading.

Winchester lists data for WSF and WST using 124 grain LRN but does not list either powder using 125 grain LRN. As I have a couple thousand 125 grain bullets I would like to know is it safe to use 124 grain data? I can't believe one grain in bullet weight makes a significant difference. I...

Any suggestions? I would prefer to be able to install it myself without a gunsmiths help. I plan on installing a red dot in the near future.

I have 2000 180 grain LSWCs and can only find one recipe for .40. Does anyone know where I can locate data or have any recipes? I will be target shooing only. I use winchester 231, bullseye, and WSF while reloading.

I plan to work up some rounds with WSF and 180 grain hard cast bullets. Does anyone have a pet load or know where I can find load data for this combo?

I was just at the local shop and found two 500 round boxes of 45 acp 230 grain lead bullets from this manufacturer. The shop wanted $35.00 for each box. Has anyone ever used these bullets?

Anyone know how much powder I can legally store in my house? I'm asking because the local range indicated that prices of powder will rise with their next inventory purchase. I may want to stock up now.

The serial numbers do match. I wish I could post a picture, though living in MD I have to wait seven days to pick it up!!!

The slide was marked HKP7M8 though the employee I originally spoke to on the phone indicated it was a PSP. I guess my main concern is if PSP mags will fit this model, I assume all HK heel release mags are the same.

Will PSP magazines work in this gun/are they the same?

I have been wanting one of these for years and with the recent flow of PSPs into the country I thought it was time to finally pick one up. I called the local gun shop today and was informed three PSPs had just arrived. I stopped in later and purchased what I thought was a PSP. The gun is...

I plan to make a purchase for either plated or jacketed bullets shortly, already have lead semi-wadcutters, and am looking for an inexpensive source. These are to be 230 grains and used only at the range. Any recommendations?

Tactical Springfield XD

I have been reloading for the 45 ACP with 4.1 grains of Bullseye with a 230 grain plated rainier bullet. I had planned to use my reloads in a glock 21 until I was told the glock does not provide adequate case support and I could be risking a damaged gun. Any opinions on using reloads for the 21?

I just got a great deal on 38 special wadcutters. I was able to purchase 2000speer wadcutters for $80.00. Problem is I don't own any dies. I am fairly new to reloading, currently only loading for 45 ACP. Will the Lee 4 set of dies work with wadcutters or do I need a "special" set.

It gets even better. I went back today, picked up an additional 3000 winchester primers for $30 and 2000 38 special 148 grain wadcutters!!! I don't even have dies for a 38 but I couldn't pass it up.