I've tried the Extreme plated 240gr in 44 mag and could not find a good load with those for a Ruger Redhawk.
For a S&W 696 with 200gr RNFP, Penn...
How far away is the chrono? I set my Prochrono up at 3-5 yards away from the muzzle, depending on what I'm shooting over it.
My shortest barrel in 45 acp is 4.25" I load 200gr for the pistols with Bullseye and 185-200gr for the carbine with Accurate #5 or VV n-340.
What gun are you loading for?
I would start low at 13.5gr and load five of those, and then load five at 14gr and five at 14.5 and five at 15gr and...
This pretty much sums it up,https://www.kingjamesbibleonline.org/Romans-1-28/
You can't fix stupid, only he can.
"Or all your primers in a glass jar! - rcmodel"
Wow, I just noticed this and my heart sank. I miss that guy.
Was that with the 123gr or the 154gr?
They do a number on rock chucks and coyotes.
I've had some 1.5" groups with wolf 123gr FMJ in my RAR, some of the cheap steel case stuff groups well if you don't count the flyers.
I did some...
I tried Accurate #5 about 20 years ago and it became a suitable replacement for Unique.
During the great component shortage I tried VV N-340 and...
I moved away from Unique for 44 spl and had great results with Accurate #5, VV N-340 and WSF.
So now I'm considering a reduced load for 44 mag...
That's like sayin if you could only have one finger, which would you choose???
I recently asked this here, https://thefiringline.com/forums/showthread.php?t=602691 can't say that it applies here, but?
but I don't think the bullet you have would work well with the pressure required for a slow pistol powder.
Just guessing here.
I tried a Volquartsen hammer and spring kit some 20 yrs ago it did lighten the trigger but my 10/22 would only cycle a few brands of 22 lr...
I think jmorris gave you a clue with data using Accurate 5744, I would guess IMR 4759 would be another powder to consider.
If I tried those and it...
I will 2nd the Ruger BX trigger group, easy to install and works very well.
The BX magazines also work great.
I did notice some leading with this load that average 1650 FPS, does MBC give a speed limit for their high tech coated bullets?
With the IMR 4759...
I do not consider .01" close.
If your cases are not the same length you will have issues. Just my 2 cents.
I'm confused 38spl and 357 Mag are the same caliber but two different cartridges just as .380 acp and 9x19 Luger, I could go on and on.....
Separate names with a comma.