get out you magnet and check the frame, it just might cast of a zinc alloy.
Why not use "U" bolts and clamp the box to a bed frame as said.
You will have to take it to a plating shop.
They will de-plate the gun removing the chrome and or the nickel / copper base.
You could use thin foam weather stripping on the door, and the holes can be sealed with
the right sized bolts.
But a safe that small will have a...
Sometimes casting is the only way to shoot a rifle or handgun.
There is no commercial ammunition made for what you have.
But before long you will...
Depends on the type of lighting the range has. If the range has fluorescent lighting, then you will need
a light box that has the old style...
Outstanding air rifle, not your usual "bb gun".
Full size and weight, great for off season training.
Remember when the seller say's "Custom" it means nothing! It is custom to the person who
made the changes to the gun. To any one else it is a gun...
Please remember that store brands were price point guns.
The reason name brands cost more was due to better wood and finish.
I have a sears o/u that was made by Zoli in Italy, nice gun, BUT it says sears roebuck on it.
That is the value killer, if it was a importer it...
It has been 12 days since the OP has said anything, good or bad.
Could be that the maker of his gun has resolved the issues with
The Cattleman II does not have the "4" clicks when cocking.
The new lock work has changed that, it is like cocking a Ruger
single action. Uberti...
Unique is the go to powder for almost any cartridge. About 10 grains behind a 170 grain cast bullet in 30-30
makes for a fun shoot. In 45 Colt...
The lighter loading are easier on the shoulder and cost much less to make.
Remington Gun Clubs can be had for just picking them off the ground or...
Shot is $43 and primers are $4.45 at Cabela's in Michigan!
You will save money when shooting non standard loadings or the smaller gauges (28 &...
I believe the presses are the same, but the die sets are different. The newer
presses use more plastic parts.
A lee load all runs from $57 to $75 plus shipping depending on the vendor!
The MEC web site shows all the parts for the 600jr and down loadable...
The $25 and what ever parts needed will be less than the cost of the lee. Unless you find a MEC on Ebay.
Buying the lee will be like throwing...
The MEC in any model is the best way to go.
The lee will load shells you can shoot. BUT many of the posts
I have read about it the owners went on...
Since you have not been open about the brand and model of shotgun you have,
I am assuming it is something from China.
A clone of a brand made...
Separate names with a comma.