Search results for query: *

https://www.midwayusa.com/product/1026780132?pid=287379 Available now. $519.99. @ Midwayusa. Free shipping.

When my old lot runs out, may change brands. The quality has been poor at times, in their other primers. I have been using an old lot of WLP for many years in 45acp & 44 mag., no problems. In 2022, WSPM were defective for me. Google - "winchester defective primers" read. Then click "images"

Yes, tip melting. Blow by in the barrels starts it, then the friction from the air keeps the tip liquid till it hits the target @ 100 yards. My first 243 win was a well used 1965 Model 70 heavy barrel. Took 10 shots till it started grouping. The groove diameter was larger then the bullet...

https://castboolits.gunloads.com/showthread.php?381165-Test-of-Hercules-vs-Alliant-2400-in-the-357-Magnum-with-6-different-primers Accuracy first. Interesting read. But with a 162 gr lead bullet. My old 1979 data. Powder would have been Hercules. Added my Photo. My current load is 13.0 Grs...

For 223, 308 & 45/70 has data at Hodgdon. Other powders listed, if there is data, load & shoot.

BRake attachment. Great price. If taking the grips off, dont loose the tiny spring. Photo of my sold 22 short kit. Brake in photo.

750 fps is SAAMI for 38 special.

Colt 2002 manual for Detective Special 38. Pressure most important, not velocity. *See note at bottom of photo.*

By SAAMI standards from a vented barrel, yes. By reloading data, No. Velocity/Load data is with longer barrels @ Hodgdon & VV. The barrel length has nothing to do with pressure, only velocity. A lead coated bullet is said to have less friction. This bullet makes for higher velocity over...

https://redding-reloading.com/online-catalog/12-competition-bullet-seating-die-for-handgun-a-straight-wall-rifle-cartridges A sliding sleeve problem. Hornady has it also. https://redding-reloading.com/tech-line-a-tips-faqs/168-working-with-your-competition-seating-die

I have Starline, large rifle primer brass. IMR 4350, BR2 primers. Barnes Match burners in 120 & 140 grs. Some Nosler 120 gr. Hornady factory ammo had the worse brass i have seen in a long time. Dies- Redding standard & fl S bushing die. Neck turned brass, no help in accuracy. Its all in the...

Shot this surplus ammo in the 70s . Free ammo if shooting the hardball match. Shot it today. Was mixed in with my batch of Starline.

Seat minus expanded = neck tension. .472" - .4698" = .0022" The (#) pounds to move the bullet were recorded using a bath room scale. Made a wood lever to slowly apply pressure to the bullet nose. The highest pounds will be right before the bullet starts moving into the case. The...

They are scrap. This is why the were left at the range.

When a loaded round is sized, spring back of a lead bullet & the brass is at different rates. Brass springs back more. May leave a bullet loose in the case.

Measure outside diameter of sized brass, before & after seating a bullet. The OD needs to get larger by a minimum of .002" after seating. Maybe try a Lee Undersized Carbide sizing die? Neck tensions, mixed brass- Test with dummy rounds, no primer or powder.

The bulge at the bullets base, when loaded in some brands of brass, may be an issue. As said. Like this.

yes, i neck turn for some standard chambers. Lets start here first- Check current fl die for over working the necks. Measure OD of loaded rounds. Remove expander, size 3 brass. More then .004" smaller or more? Buy a fl bushing die like Redding type S. Dont want to buy another die...

6.5 auto or bolt? Somehow a 223 auto entered thread?

No idea of the velocity? Fired in my Savage axis. 100 yard target.