Search results for query: *

to all; for those of you that have static problems, try this.. a can of Static Guard (orange and blue) from wallmarts! its simple! just spray the area and let dry. application time is 10-15 sec, dry time.. give it a day for best results. you might want to spray a line up the wall and over...

just for one and all that use corncob to clean brass, listen up big time!!! your local Grangers has a real deal!!! FOURTY pounds for $ 35.30 dont belive me? check item number 2MVR4 in their catalog or on line! this is 14/20 grit what they call blasting media,corncob 40lbs. i didnt belive it...

to bds and all, just a quick note about die lock rings just about any large fastener company on the net has "thin style 7/8-14 lock nuts" they are hex nuts about .200 to 1/4 inch thick and really thin from the flats to the threads and they go for about 20 to 40 cents apeice. (on my Dillon...

to fort maceo and all, first i dont work for Dillon Precision (but i wish i did) the dillon trimmer might be $225 BUT, being able to decap, trim and resize the case ALL in ONE pass AND do over 500 an hour DOES have its advantages!. the process i use is as follows if anyone wants to try it...

to Sawblade, try this for drying the wet cases, get a really big terry cloth towel (beach type) pour wet brass in the middle. at the ends of the towel, grab the corners at one end in one hand and the other end - corners on the other hand. get just the corners not the material in between because...

to all; speaking of cheep roller chests, sears had one that was $99.00 a few years back with a bunch of drawers and it bolted on to a cart with 2 more drawers and a large bin in the bottom. it was aimed at the homeowner market but it works great for me. the upper drawer chest has a large one...

to 4TheResistance ; i wonder if this problem will EVER go away? please be aware of the safety issue with using a shell holder to decap rounds. YOU DO NOT DO IT!! i have SEEN what can result if you try to use a shell holder in this way. the shell holder was NEVER ment to be used this way...

unclesam099 didnt know MMC had them. i gotta get a new catalog!!! thanks for the update snipe

to unclesam099 and mongoose33 and all, all you need for hooking this adapter up to a standard bench motor is a buffing wheel adapter. these are avalabel at hardware stores and ehat it does is allow you to mount a cloth buffing wheel to a benchrest motor. they are about 3-5 inches long depending...

ric426; really neat circuit!!! i use something similar to it using a pair of General Electric H22B3 photodarlington optical switchs. in basicaly the same setup on a Dillon 650 powder checker die ( i had to modify the plastic and the rod to make it adjustable enough to cover 9mm and 30-06 but it...

Darrell Davis, heres a thought on lube. (for all case lubing) Get a few tubes of Lee case lube, its water based!! (wait for it!) you get one of the larger spray bottles at Home Depot garden center, get the 1 quart size, mix 4 parts water to 1 part Lee case lube right in the bottle. put the...

Daboone, save your money, don't buy the paint!! it wont work!! tried on the old RCBS rock chucker i had, didn't solve the probs it had!!! but those same probs are what put me on the warpath to find a good press! a lot of my friends were into reloading, they had all sorts of presses and this i...

Roccobro; copy that. the spent ones DO tend to Escape/fly out of bottom of the ram deck. but at least they are spent ones, easily vacuumed up. but the guys with the Lees do have the prob of live getting out. you would think Lee would have come up with a better way( or would have at least tested...

Floppy D; the powder order was over 20 years ago, the bullet orders are just lead and copper, and 20 years ago i had 2 suppliers within 40 miles in the city i lived in THEN. moved twice since as a result the local shops are starting to have a fairly good supply of powder, so i don't need to...

to all; resizing rifle brass and its cleaning; due to the differences in chamber sizes in the same caliber, i have found that using carbide small base dies does the best job on small cases. however; with the larger cases (.223/5.56mm and up) this seems to work the best 1 clean the cases. i...

mongoose33 home depot, cheep timer that plugs into the wall for indoor lights. in the electrical dept plugs into any outlet and has a socket for the lamp (read tumbler) with time duration settings from 1/2 hour to 23 1/2 hours. there are about 10-15 different designs to suit any needs mine has...

Rembrandt; the mods (modifications) you have on the XL650 are great the sliding rail system on the bench is probably the best one, could you provide some info about it? i must admit i am already in the process of copying some of them for my setup! the mirror on the brass hopper was brilliant...

Ok Daboone; im lost, just what modifications (mods) did you do here? ( as i have a Dillon setup i dont get lost or "escaping" primers.) sorry but the pics arent too clear. where IS the mod? please explain thy self!!!

Quickdraw McGraw: i am trying to setup some pics for you and the rest of the bunch. will post asap. I'm trying for closeups of the modifications (mods) and will repost all of the mods if i can. some require some exotic parts you have to make and some i can make the odd part for you ( don't...

Brian; i have a standard mfg license, covering reloading in bulk. it is registered with the BATF and was issued by them. because almost 90 % of what i do goes to law enforcement and military contractors, i would like to think that i am helping fight crime and terrorism. have no fear, my legal...