Search results for query: *

Looks a lot like it was buffed out creating the rounding and then sprayed with Duracoat

Very Fine steel wool 0000 and good gun oil. Do not rub too hard or you will remove the bluing. Get as much surface rust off as you can and keep a heavy coat of oil on it till you decide want you want done

I see rust on those all the time. I would suggest using a good wax to help prevent any more rust

I think the same thing happened to me the other day.

I think a lot of it depends on who is doing the refinishing and what finishes are being used

Rittmeister I believe that I returned your email this morning. Please feel free to ask any questions that you may have about refinishing

If it is just mags you need done you can send them anywhere in a flat rate priority mail box for $5.15 plus ins

If you are going to do it it yourself I would suggest using something like Gunkote you can buy from Brownells. The key to refinishing is the prep work. If you want rust and corrosion protection I would also suggest parkerizing it first. If I can help or answer any questions feel free to ask

Also a licensed FFL dealer can only ship a handgun through the post office to another FFL An FFL can not use the post office to ship a handgun back to the customer only to another FFL

The cost to Bobtail your Kimber is $50 for a Ed Brown Bobtail plus $75 to install it plus refinishing the frame . We are located in the Northeastern part of Tenn you are not that far I think.

You can have the gun Bead Blasted which will dull the look of the Stainless depending on what size glass beads are used

I do Bobtails and would be happy to answer any questions that you may have

I would suggest that you Parkerize it first then use Gunkote it is better then Duracoat and better then Cerakote but the Parkerization will help with the rust and corrosion resistance

Those Auto Mags all had a very rough blasted finish on them. You can use the rust to get a lower price I hope then I would have the gun Bead Blasted

THere is no comparison between the two. Electroless Nickel is a plating process that offers great corrosion protection as long as it is done correctly and has great durability. Duracoat is a two part paint process like Cerakote and the other DIY paint products it is not durable and will...

What type of finish are you looking for?

The key to any good finish is in the prep work. You need to completely disassemble the gun and remove the old finish by media blasting it not with a piece of sand paper. Degrease each part and spray each part allow the Duracoat to cure before reassembly Duracoat is OK but don't expect it to...

You can also use Duracoat on a scope

To have an FFL today you are required to operate a business meaning you must be able to maintain operating hours. The location must be secured with an alarm system and safes that meet certain standards and open to the public. You must adhere to Federal,State and local laws check with all of them...

Just remember the key to any good refinishing is in the prep work