Search results for query: *

Hey guys, I've recently built a 6 dasher remage setup that I wanted to share about. It's a nss criterion 7.5 twist 26" remage barrel threaded 5/8x24, Remington action, ptg bolt, trued recoil lug and nut, timney Calvin elite trigger, and a mc3 legend stock. Shot several different loads and...

hey guys, I recently made a post about reforming 6mm creedmoor brass to 6xc. well heres another. I have a ton of hornady 6.5 creedmoor brass laying around so I decided to reform them to 6x47 lapua, which is made from 6.5x47 lapua brass and is again, expensive! i removed the spindle from my...

hey guys, I thought I'd share some info with everyone. I'm not sure if it's been brought up before or not so here goes. I shoot prs matches and people always leave behind brass at the end after cleanup. for some reason they just dont worry with it. so I have acquired a bunch of hornady 6.5 creed...

can anyone tell me what the load was for the hornady 140gr 6.5 creedmoor ammo when they used to put it on the ammo box?

hey guys, I have recently picked up a desert tech srs a1 gen2 and acquired 4 barrels for it. 2 factory 6.5x47 barrels, factory. 308 barrel, and a 6.5x47 bartlein barrel that had almost 2000 rounds on it for almost the price of the extension. I have since had it rechambered to 6.5 creed...

hey guys, I just wanted to give a little briefing on some load work I'm currently working on for my custom rpr 6.5 creedmoor. I have about 400 fired hornady cases from some once fired 147gr eld match ammo I picked up at the range. all the boxes and case cartons were there! well anyway, I'm...

guys, I have ran a custom 6.5-06 for a while now and it's a very impressive round to say the least... I have only worked with the 140gr Berger hybrid to this point with different powders. here are some loads that I've found that are safe and performing in my rifle. always start 10% lower and...

I've recently acquired a gen 2 desert tech in 6.5x47 and love it. Today my second barrel was delivered, that I purchased on the net. It's a 22" .308 win factory barrel that is pristine in condition. I couldn't really find any load data for the dt so I figured I'd ask for some to maybe help...

Hey guys, I just picked up my new custom ruger precision rifle and worked up a load today. 130gr nosler rdf, Peterson srp brass, re17.... 42.9-43.3gr of re17 shot very well, and I decided on 43.2gr to run my magnetospeed after I shot for groups. I had a max fps of 3039 and a minimum of 3026...

Ok some of you more experienced reloaders out there, I have a 224 valkyrie and reloads are underperforming for the speeds I am sure it should hit. So my question is, what powders will give the most velocity in .223, 22 nosler, 6.8 spc, 6.5 grendel, and any other similar sized cases? To this...

Looking for 22 nosler load data with heavy bullets.

Well, this is a cartridge that caught my attention and made me a little excited. The 2700fps with with a 90gr, 3000fps with a 75gr is very intriguing to say the least. From what I'm being told is that those velocities are lower than handloads will be by far. I have been talking with a small...

I took 2 deer with my custom 6.5 creedmoor ar10 this past Arkansas rifle season. A doe @ 140yds and a buck @ 295yds

Hey guys, I'm about to do my 1st ar10 build and I'm looking for some suggestions if any are needed. I'm starting with a cmmg mk3 .308 carbine, rainier arms 22" 6.5 creedmoor barrel, Luth ar mba3 stock, Hogue grip. My barrel gas system will be rifle length +2", and I'm curious if I'll need to...

Hello everyone, I've recently picked up a new to me m77 target rifle. The stock had a crack in the wrist that was near to breaking into. I have the stock solidly repaired with 2 hidden screws and some epoxy. Thinking, whether or not to refinish it to rid it of the ever slightly seen cracks...

Curious what gun safe you guys would recommend in the $3-4000 price range. Want security, fire rating, etc.

I recently purchased a rifle for fclass that just eats the bullets for breakfast! Came with 100 loaded rounds and 100 individual DTAC. But there's a problem, every time I have called to attempt to order some I keep getting told that they are expected in two weeks. That's been the last 3 times...

Hey guys, I picked up a beautiful rifle that should be shipping to me tomorrow! From pictures, it looks amazing! The only thing wrong is that it's missing the diopter sights, so I'm going to scope it utilizing a mount a guy makes "down under." I picked up a 36x bausch and lomb target scope to...

I just won an auction on gb for my new competition rifle. It's a whidden gunworks build using a master class fiberglass stock, broughton 31" 8 twist barrel, kelbly action coned bolt, and a jewel BR trigger. I'll post up some pictures when I receive it! But for now, do you guys have any load...

I'm really drawn to this rifle. I know there are several variations and generations. What is the value of a gen1 srs?