Wow, the thread "notify" still works. A Lazarus thread awakes. LOL
The "design" has never really changed IMHO. Big Green tried to cheapen the build process to compete with lesser guns price-wise but the guns are all pretty much the same. The dreaded "dimples" that arrived shortly after...
We have a pair of 1100's here at casa del 9mm and we like them both very much.
One is an old magnum that is wearing a 2.75 barrel now. This gun also has the newer style "one piece" piston and CM lifter. I very dependable gun IMHO.
The other is Mrs. 9mmMike's 20 ga. 1100 Special Field which...
Then I'd say it sounds like cheap/bad ammo or rough chambers. Odd that you'd see bad chambers in two used guns though. I do recall that I had a couple Express barrels that would misbehave after they got warmed up. Spent some time polishing the chambers and they were fine.
IMHO, an 870 should...
That's a great price IMHO. My '70's Magnum was more than that. I put a 2.75" barrel on it and, thanks to byf43, newer seals and lifter. It cycles light loads just fine with all three of my barrels, 28", 20" & 19ish".
How do you "unlock" them after they are in the "slides wont slide" condition?
I am asking because you can induce this problem (you said it happens in two different guns) by applying rearward pressure on the slide handle while shooting.
I can do this on purpose during dry-fire on several of...
The last Remington gas gun that I worked on (that had these problems) was an 1187.
The trouble was that the new owner had not cleaned the gun thoroughly before shooting OR he had lubed the outside of the mag-tube.
Whatever he did, it did not take long before the outside of the tube was all...
It looks exactly like this one in this thread:
http://www.thehighroad.org/showthread.php?t=64923&highlight=American+York
However it is has 30" barrels. The stampings are the same as the one's in those pictures but the number is 301nnn on all three parts.
I still need parts! What...
No pics yet but I just picked up a SxS double trigger in 12 Ga. flavor. The only markings are the words "Amercian Gun Co. New York" on the plate (which I do not the proper name for) to which the hammer is attached.
The are no marks for the chokes.
The wood is very nice and it locks up tight...
My guess is later that '94. I have a '94 Express Magnum here that starts B07......
Call Remington at 800-243-9700 and they will tell you over the phone.
Good luck with your 870.
Mike
I can tell you that it will fit. I assembled a 16 ga. WM here at casa del 9mm with all 12 gauge parts and it went together fine. It would not pump however as the receiver is not clearanced inside for the 12 gauge bolt to fully open.
I did this by accident by the way as there was no indication...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.