I have a few 357 mag lever guns that do not like the Lee TL358-158swc bullet at the stated OAL in my manuals They function just fine through the action but I have a issue loading to maximum capacity in the tube. Seems like they are getting hung up in the tube on the last lube ring bearing...
Really should be Renamed ... Primers, powders and components are still out there for reasonable prices ... Last week I was surfing the net after working a 12 hour shift. I did a simple search on GunsAmerica auction site for small pistol primers while my car was warming up... The first...
I have recently started to reload for the tokarev cartridge. I am having issues with the neck od after seating the bullet. I am using 2 different bullet weights in hard cast and powder coated lead. I am sizing after coating. It is coming out right at 311.
I am using S&B once fired brass and a...
I have a bunch of triple 7 FFFG. Maybe 6 lbs of it I bought for my cap and ball revolvers. I have a old ruger security 6 stainless 6" barrel in 357 mag.
Anyone run the triple 7 powder in these cases either 38sp or 57 mag? If so any input on loading for either? I realize it will get...
I came across a bazillion 454 round ball...balls that are cast with near ww bhn and the seller didnt like the hard push to seat in his BP revolvers.
Anyhow... I assume these have been run in 45acp before.. They seem to be all .138gr.
Anyone run these for plinking around in a 1911 or even a...
It says this drops a 93gr bullet at .311"
Think this will be alright for plinking in my 32 H&R magnums? I could probably powder coat them to get close to the .314 that is recommend for the 32 h&R mag. I have a 314 sizer that can be used if needed.
I'm just tired of looking for cast...
I have a NIB FEG pjk-9hp Browning hi-power clone that came with one low cap 10 round magazine.
I bought some Browning HP magazines from mec-gar but they do not lock up in the gun. Seems like its just shy of catching..
On a side note I have a Arcus 98 HP clone that the mec-gar magazines fit...
Just had my 25 year Anniversary at my job. Got in as a apprentice right out of high school been with same place since then.
Was given a booklet of things to pick through as a Anniversary gift from the company...Nothing tickled my fancy so I picked a Bose soundbar and turned around and sold it...
Alright you handgun aficionados.... Any help identifying these two magazines? I have a buddy with these that came in a group of mags and we cannot figure out what brand/model they are for.
Anyone remember this thread?
https://www.thehighroad.org/index.php?threads/dead-peoples-reloaded-ammo.775725/
I've been stuck with 4k rounds of reloaded 32 h&r magnum for a few years. Never had anything to run it through. Finding myself bored I started taking it all down after work to burn...
I have Rossi .357 in blue. It is out of "warranty". It's driving me nuts. After the magazine tube is loaded the loading gate pops out and causes the action to jam up. It seems to be caused by two issues. Or one of them is causing the other.. I don't know.
1. The loading gate being able to...
I want a Astra 600. I'd rather have a 400 but I really don't want to load another weirdo caliber. I've always wanted one of these 2 and the finances may allow for it.
Just short of diving into a google search of varying info does anyone have a 600? Can you get replacement parts if the need...
Picked up this Ruger P89 off of GB for $100 w/2mags a while back. It was BEAT cosmetically. Functioned just fine although I did put a new recoil spring into it. Donno where it was in service but they were rough on it.
I got bored and tore it all down and did a full restifacation on it.
I...
I have a gen 3 Glock 27 in .40 s&w.
This was my first Autoloader hand gun purchase as a young'n in 1997 or so when they first came out. It has Great sentimental value to me in that respect so I have no intentions of selling it to get a 26. I have carried it for years but not shot it a ton...
I am a machinist by trade and would like to build something like this to save my shoulders and elbows, they are already in bad enough shape as it is. My specialty is not pneumatics and am seeking advice from someone that is. Maybe a few folks here are well versed in the subject.
I see a few...
A few years back I came into 2-3k 38-40 180gr wax lubed bullets. I don't have a 38-40 but I have a few .40's and 10mm's
These are marked as being 18 brinnel and are sized at .401"
For the heck of it I have loaded up a few in hopes to run them through my carbine. 10mm has a OAL of 1.260...
I didnt see a build section here on the forums but I wanted to share my latest rifle build from a parts kit.
I have a m11/mac 11 carbine I love to shoot so I decided to build a M10 style version in 45acp. Heres part of the build and I will update as I go along.
I used a Velocity arms parts kit...
I kind of lucked into a few Hi-point carbines a few years back. My wife Shot a friends 9mm hp carbine and decided she had to have one. Unfortunately it was around the time of the last great gun panic and I couldn't find one for her that wasn't way over priced. We hit a local pawn shop and...
My Father has handed off his 16 gauge Stevens 311a to me. Its a old beater SXS and I really don't know much about turkey guns. Can buckshot or slugs be ran through this without messing it up?
I have a old Ithaca in 16 gauge that I have horded ammo for over the years so I have some ammo to...
Walked into local fun store and they had a new old 1858 clone in a brass frame and 44caliber for dirt cheap. I asked if they had any wiggle room on it and they knocked $20 more off it. It's a Richland arms 1858 knockoff. Supposedly the guy had it on a plaque in his office for a few decades.
I...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.