warm water and lemi-shine for a few minutes, rinse several times, then lay out on old tshirt with fan blowing on them to dry.
I do agitate them by hand some and i do deprime before.
works great.
Gun: 20" Wilson barrel with Wylde chamber RRA Ar-15.
Load: 69 smk with 25.3 Varget at 2.260 oal. Shoots 0.8-1.2 moa at 100yds, but about 2-2.5 moa at 300 yds.
I've been using a FL Lee die set up the way the instructions say to, screwed down until it touches shell holder and then another...
I used some heavy felt material with some oil in it, worked well on my 91/30.
But bedding the action (mainly just the recoil lug) and adding pillars helped more than anything on mine, it was good practice on bedding a rifle and I had already "destroyed" collector value on the gun when I...
its easy.
listen to the tape advice.
use the tutorials on ar15.com.
when done be sure to function test everything (just keep the hammer from going full force into the lower, use you hand to slow it down) to be sure the safety and disconnector work correctly. there is a step by step...
I always had cajun/seafood calzones and lots of beer.
The 75 Hornady a max has its place at long distances but like you said it can't be loaded to mag length. It works but is a pain to single load, but for small groups on paper at long distances stance they work. I'm just starting to play with...
For accuracy, 69 or 77 Sierra smk. Not good for hunting though. I would try Barnes all copper or 65 Sierra game kings for hunting. I noticed MSU in your sig. Is Daves Dark Horse Tavern still in business? I was there from 2000-2002.
What are you wanting to do with it? Just plinking big targets at 100 yards and less and just blasting through cheap ammo , long distance precision, self defense, deer hunting?
a well placed quality hunting bullet fired from within 150 yards will work well on deer.
quality bullets are something like barnes all copper, nosler partition, 65 sgk, winchester power point, etc. no match ammo or fmj.
as long as it will adjust to hit target and still have some clicks for adjustment in all directions, your good.
now if you have adjusted the scope to be on target and only have 2 or 3 clicks left until you run out of adjustment your scope is bad or holes in receiver are off.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.