Search results for query: *

Rodents are out over here in my neck of the woods which has helped me work through the remaining stock of H4198 I've had on hand for over 10 years... at which point I went to acquire more and essentially realized I was all done using H4198 given it's 'new' asking price. Close to a quarter per...

A 1-8 twist 22-250 seems like it would be a dream come true if it functioned even somewhat reliably. I have piles of brass and suitable .224'' bullets from 36gr - 77gr. that I'd like to try and utilize, as well as a Trijicon Accupoint with the triangular target dot that I think would be...

https://www.midwayusa.com/product/1023405869?pid=186742 Curious if anyone out there on the highroads has been experimenting with this bullet? These have been available for a fair amount of time now. At .26 cents each with a free shipping promo, I decided it'd be a good candidate for the...

Over the weekend I bought a couple 1lb jugs of Retumbo at a local Bi-Mart. Upon opening, it seemed like the seal didn't have any adhesive or was previously opened because it remained inside the lid.... same thing with both jugs. So I sent a quick email to Hodgdon with the lot number, and...

A family member inherited this thing along with several others last year and is just now getting around to shooting a few of them... Action has minimal markings. Only thing that seems easily identifiable is the serial. No caliber stamped on the barrel. Calipers placed inside the muzzle...

Recently aquired this 26" barrel in a large lot of goodies. I'm guessing it's extremely common I just don't know my shotguns. Can anyone tell me the make/models it fits? Thanks for the help!

Well I have yet another one for you guys to eye-ball for me. My Mom recently inherited this rifle and has asked me to price and sell it for her. Finding one from a past sale or auction with similar wear to gauge a price from has been difficult so far... for the most part I just see restored...

A family member recently inherited this rifle and we're having a hard time putting a price on it. With my limited understanding, just comparing to pictures of similar unmodified mausers.... it looks like the top of the receiver has been tapped for scope rings (which were included)... bolt has...

A family member recently inherited a P38 AC40. Trying to get an idea or a rough ballpark to price it at. Stamped '7216b' on LH slide and trigger guard. RH side of slide has 2 very small stamps reading '359' with a Nazi eagle between them. In the front, under the barrel, it's stamped '8814...

A family member recently inherited a P38 AC40. Trying to get an idea or a rough ballpark to price it at. Stamped '7216b' on LH slide and trigger guard. RH side of slide has 2 very small stamps reading '359' with a Nazi eagle between them. In the front, under the barrel, it's stamped '8814...

I have a model 700 sporting an 18'' .308 1-8 twist barrel by AAC. I also have a decent selection of 200+ grain 30-cals to play around with... 208 A-Max, 220SMK, 220gr Sierra Pro Hunter, Hornady 225gr HPBT, and a pile of blemished 240gr SMK. Powders on hand: 4895, 4064, 4166, BLC2, CFE223, TAC...

How many NFA related forms/applications are approved - annually - that require a pre-emptive $200 'Tax'? Are these numbers even published & readily available? Web searches related to this topic yield such an overwhelming amount of 'wait time' talk that I had to see if anyone here could point...

Mods- I have this same thread posted in your "Handloading" sub-forums as well - I realize it's more of a Reloading question - but I'm getting crickets so far.... Lately I acquired a couple different .355s to play with - all of which are 115gr - 124gr. I've used 147gr bullets exclusively up to...

Lately I acquired a couple different .355s to play with - all of which are 115gr - 124gr. I've used 147gr bullets exclusively up to this point and got excellent suppressed results with an Octane can using both Unique & V-3N37. Very pleasant to the ear, fun to shoot etc ... That all changed...

Noticed these after doing a little range pickup... Had to share. I've never seen part of the primer pocket itself extrude out and flatten against the bolt face like the one on the left. The 'half moon' shaped piece of material you see next to "REM" is actually brass from inside the pocket...

I've loaded several thousand 147gr XTPs & cast coated pills at sub speeds using 3N37... just looking to find out if I'll run into cycling trouble trying to get the lighter 115-125gr .355s down around 1000fps? I've always bought the heaviest bullets available assuming they're absolutely...

I'd love to hear from any of you having success with any light-weight .224 diameter bullets (40gr or less) - shooting well in a 1-7 twist barrel... and I guess I would vaguely define that as; not blowing up en route to target & 1moa or better. I'd like to try and do some varminting this...

So I recently made a purchase of some lowers that were listed as 'on sale' with no mention as to the sale price reflecting blemishes. All 3 that I purchased have this same unfinished forge line. Also, the tremendous spread between the serial numbers was odd. 1800 - 3600 - 10200...

Has anyone even laid eyes on a box of these this year? They are by far THE toughest bullet I've ever tried to buy in ANY caliber - ever. I've had email notifications set up at a half-dozen online retailers since LAST YEAR. Starting to think they're exclusively manufactured for use in...

I just recently ran out of CCI450s. Not too excited about ordering more right now...I need to try and start utilizing these Tula primers I've got on hand. Is anyone using these non-magnum KVB-223s in their 300 blk? I use H110, A1680, and Lil'gun. Hoping to hear if anyone is having success...