Search results for query: *

Could be a little I suppose. Been using one shot without issue. Perhaps I got more inside this last time around?

Lol. Primer and stuck case taken care of. I resized empty cases that were already sized, NOT loaded cases. But they were primed. Just using calipers inside jaws, my cases measure .220. So I have .004" ish neck tension,, a least at the top of the case.. The new starline that supppsedly don't...

2 hours of my day off, no rounds loaded, stuck case with live primer, and a few questions. Started loading 223 last year. Tried a couple different bullets and powders, finally got a fair amount of brass prepped and decided this was the weekend to load up 500 of one of the projectiles I had a...

The Hornady 62 fmj ran good from 25.5 to 26.8g of cfe 223: 62 fmj hornady cfe223 25.5 cci 41 ruger 16" 5.56 - 2575fps 62 fmj hornady cfe223 26.8 cci 41 ruger 16" 5.56 - 2731fps

CFE worked ok for the 62gr I loaded up. No better or worse than the 335. Need to find the time to see how the rmr 69gr do. Sorry, no 55gr data to report!

Perfect timing! I've got 5 groups of 5 loadings of the same combo sans primer and brass brand ready to test this weekend. I'll post my results if I can get an acceptable format.

I snagged 1k of the 69ers myself. Hoping they can shoot better than me, which is not that hard!

You guys are horrible. Forcing me to look for new guns and & new caliber to load. That's the story I'm telling my wife anyway! Glocks and s&w revolvers are my favorites, so I'll need one of each in 10mm now...

My Nikon monarch 2x's have had no issues with lots of full power loads. They can still be found. Otherwise the ultradot mentioned above or vortex venom have both held up well for me.

Thank you!!!

Please and thank you if you could PM me : ' )

Yeah, I'm showing 1220 and 1300 depending on which bullet mfg. for 14g with 158g from my 6" 686. Magnum primer.

I stay under 100 yards so it may not apply, but fixed 2x works at my max range. My groups are a bit better with the magnification than with my ultradot or vortex venom with 3moa dot. But all are deer moa and the dots are much lighter and quicker.

Yep. Will check into those sticks. Thanks for the heads up!

Thanks! Just popped over and ordered one.

Have shot IMR4227 in 44mag for years, been loading it in .357 for a little while now as it was accurate enough and I've always got a bunch on hand. Decided to pick up some 2400 for the 357. Loaded up 6 starting rounds to check velocity, extraction, etc.. Walk outside today, set up the chrono...

Good to know. New item in my routine, visually confirm at beginning and end of each session that disk is advancing fully and if not, check the above!

R44, next time you're in Michiana, I owe you the beverage of your choice! I happened to have a new a spare swivel adapter in a bin, so I swapped it out. BAM! Back in business. Not much material missing on the non working piece, but apparently it was enough. Thanks again!

R44 flyer, that's an interesting theory. I could see that if you're referring to this part? https://fsreloading.com/lee-precision-swivel-actuator.html It's $.10 cheaper to buy the whole assembly???? https://leeprecision.com/swivel-adapter.html

Thanks tightgroup! Disk is definitely in the slot on all units. Email into Lee. We'll see what they say.