Search results for query: *

Hey folks.. loading some for my 30 carbine. Got plenty of H110, but only have plated bullets and can't load them to factory spec. So I've been loading them with some Unique and having fun shooting, but when I'm out of plated, I'm going to buy only FMJ for this load. Where are you guys...

Got a box of X-treme plated 30 carbine 110g bullets. I know you can't push these being plated over about 1500fps, but fmj 110g w/H110/296 is running about 1900-2000fps. Haven't used H110 much but know you shouldn't load it down below minimums. What powders are you guys using to load...

I've started shooting my Marlin 1895 22" 45/70. I've only tried my loads because i want to use jacketed bullets instead of lead for hog hunting. No matter how i adjust the buckhorn sight, i shoot low at 50yards. Now, i'm nowhere near max, but i'm running 1700 + fps with my loads. Bullets...

I'm having some issues with a lot of blowback on 45 colt.I'm loading 200 grain round nose flat point with 6.3 grains of Trail Boss. It's a nice shooting load but it's awful sooty. I'm thinking that I may not be crimping hard enough. I'm thinking it's not got enough crimp to seal the chamber...

My wife is wanting a service rifle to shoot and she likes the 30 carbine. It fits her, and she shoots one very well. A friend has an original WWII carbine we go shoot from time to time. Anyone know anything about either the new Inland or the Auto Ordinance M1 Carbine. Going to be a...

I've just started reloading for 44-40. Fun caliber, fun gun to shoot. With a Uberti pistol, 73' Cattleman, I got a few that were tight to chamber. Now, I checked each one with a Wilson case gauge, and they all fell in and fell out. 98% fell into the cylinder perfectly, but got a few that...

To crimp.... or not to crimp.. Just getting into the M1A. On my AR's, i never crimp. Will be shooting milspec 147g and 168g Match. What do you guys do who are very familiar with the M1A loading. Dies... thinking the Redding. What are you guys using? Pro's - Con's... I'm all ears...

Friends ask me all the time. When we go to the range, I have to prove it time after time. It's not about saving money.... although that's a perk. But it's all about consistently hitting what I aim at. Every time. And it's a great hobby and something I really enjoy. Here's my two loads...

Anyone seeing any of these out there these days? Looked at all the local and at all the big box mail order houses.. Nothing to be seen.. Need some for my 308 loads...

Hey folks. Looking and interested in getting a ultrasonic cleaner for cleaning small parts on my guns, and such. Can you please chime in with your pro's and con's... what you use for cleaner solution, if you use one and why, if you don't use one and why.. I'm interested to hear all sides...

What bullets are you folks using for 2-500 yard shots with a M1A? I've heard that the 168g are pretty accurate for those shots. So, what powder and bullets are you guys using to ring the bell at those distances? Thanks! Happy 4th! Let freedom ring!

What do you guys do to dry your brass? I'm thinking of getting in to wet tumbling, but don't have a lot of options in drying. Some use a corn cob tumbler to dry. I have that. Does that really work or does it make a big mess in the very clean cases? What are you guys using to get the...

Hey guys, picked up a 44 mag S&W 629 locally pretty cheap and i know the loads for the magnum is H110/296. What powders are you guys using for reduced loads so the missus' will have fun shooting it?

I have found some 44-40 Winchester bullets (projectiles) here at a LGS. They are the jacketed Winchester SP's, but their diameter is .426. I've been shooting .428 in both my 44-40's. They both slugged out at .428. What problems would i encounter shooting these, if i wanted to use it for...

Well, i've just about finished up all the fmj's for my carbine, and i have a bunch of Xtreme plated 110g to load up. Thought I'd try them, everyone seems to have great luck with them. My question is. I'm using H110/W296 for my powders, but at minimum load the velocity is still way over...

All i have shot in my rifle is lead, .429. What jacketed bullets are any of you guys using in a 44-40? Wanted to try something different! Thanks!

Anyone got any they want to get rid of. Got bullets but no brass.. Anyone seeing anything on this evidently elusive cartridge? Think Winchester will ever make the brass again? I know about the 38/55 brass you can use for lighter loads, but I have a 38/55 rifle too, and don't want to get...

Hey guys, going to be moving my shop into a 28x28 building and want to make very sturdy benches and shelving spaces above the workbenches. It will have central h/a and water. I have a 8' industrial table with a 2" thick butcherblock top that's 36" deep that has both of my Dillon's attached...

Got a couple pounds of H110 today!! Had a bunch of rifle powders but not much that i have ever used for pistols.... but i'll take it for my 44mags and 30 Carbines!!! And 24.95 a lb... Not bad for a Monday!!

Hey guys, what are you guys trimming your brass to on your 223/556 brass? I have been trimming mine to 1.750 but got my new Giraud Tri-way and it's set to 1.760. I know that's max length, but is anyone using that, or are you trimming shorter? I'm just wondering why it came to max...