Search results for query: *

well you certainly don't HAVE to....its not unsafe at all IMO but for reasons mentioned above I do use magnums unless I just couldn't get them. Just about all of my .357 loading is with H110

I really like my Lyman case trim Xpress, I also have a WFT for .223 but I have a hard time running it fast enough on my cordless drill to not leave a burr, so I still have to deburr and chamfer which I also hate. With the motorized Lyman on higher speed it trims clean enough that I can usually...

By backing it out a little bit at a time to achieve just barely enough sizing to chamber freely in the rifle. For instance in a bolt gun, moving the shoulder .002-.003 less than a case fired from that gun is a pretty common thing. In semi-autos it usually should be more like .004-.005 for...

The angle and/or shape of the legs is slightly different to keep the pellet a little bit further away from the anvil, making them less sensitive to a light hit (such as a floating firing pin might make)

I switched to Energizer Ultimate Lithiums in all my flashlights and electronics (GPS, radios) that might sit for a period of time between uses. They never leak, they are lighter weight, hold charge longer, work better in extreme cold and they simply last longer in use. Well worth the $ IMHO

I agree with trying to drop the load a little bit. My T/C with a 1:48 twist shoots great with PRBs @100 yds up to about 80 grains, above that it starts to get squirrely.

UPS changed the ORM-D tag a few years ago. Now it's just the appropriate hazard diamonds.

Mine was an Underwood M1 Carbine, with original sights and mag pouch with 2 mags. It was 2016 in a small town gunshop for $750 and I'd long wanted one, only paused because I'd just earlier written a sizable tuition check for my daughter's first year of college. Came to my senses and went back...

I have not experienced this issue personally and I have three different lowers I swap around often between four different uppers for competition and I always use the data/dope book for the specific upper regardless of which lower I'm using that day. Granted I'm also not shooting for tiny...

.300 Weatherby Mag, because I have it and it has done some world traveling with its previous owner (my old boss who retired and later gifted it to me). If I ever got a chance to hunt for some of those larger species it would be cool to use in his honor. And I know it shoots because I built the...

I've seen service rifle sections in Sierra manuals, in fact I have a PDF section of the pages with service rifle .223 loads.

26.5gr of BL-C(2) has consistently been my most accurate load for 52-55gr bullets, 53gr Sierra Match King with that and a CCI450 is pretty much my benchmark 100 yd load. Multiple barrels and configurations.

CCI Velocitors work pretty well, better than other ammo I tried in .22LR anyway. My buddy and I were recruited to eradicate a very bad rock chuck infestation at his aunt's ranch a few years ago but she did not want us using anything more than .22s due to noise/animals/neighbors . Mini-mag HPs...

Sounds like you won, my friend :) My brother was given a Bryco Nine, but in (incomplete) parts. He gave it to me and I was able to order the couple pieces that were obviously missing, pretty cheaply I might add - but it took me quite a while to get that stupid thing to run right. Finally...

The bases and sides look clean, I would just load and shoot rather than clean (and disturb) that little bit of lead dust inside the hollowpoint. No benefit to cleaning them IMO

I wouldn't try to salvage anything from the whole lot except maybe the bullets. Even if the Norma brass isn't showing the same obvious damage as the Remington, it's the same powder and seems likely enough to be around the same age and even if the deterioration isn't externally obvious I bet...

I have a recent one (2018 I think?) in .45 Colt, lots of fun and it's accurate. More so when I switched the rear sight to a flat style, as I don't shoot a buckhorn especially well. I expected to have to slick it up a bit but it was smooth enough and has gotten a better with use. Wouldn't...

I have a 642 Performance Center (same as the 442 except with a matte silver finish), and the trigger action is definitely smoother operating and feels lighter to me than any standard 442/642s I have personally handled. The slightly longer rosewood grip is an improvement too. Overall very much...

642 Performance Center .38 spc ..... very smooth DA and that little extra grip makes a difference. And it looks great :)

Bring a tablet or Ipad to connect to the ShotMarker target...it can be done with a smartphone but a larger display is much easier to see and navigate in position. My first match with E-targets I was not aware I had to bring my own.