Search results for query: *

I have a refrigerator that doesn't work anymore and I want to use it to store powder. Do I have anything to worry about specifically? I was just thinking of getting some moisture absorber that may help

I just put together my second ar15, using a PSA upper without BCG and a BCM BCG. Components are marked .223/5.56, however in looking for a headspace gauge, I am finding out there are 2 different gauge sets, one for .223 and one for 5.56. I will be shooting both and need to know what gauge to...

Both my lyman 49th and my lee loadbooks say the case length should be .75, but all of mine come in shorter, at .70. Nowhere that I could read did either book say a minimun length, just that the case length needs to be .75. Would .70 be ok?

I have 2 books, Lee and Lyman 49th, went to Alliant powder website, loaddata.com and cannot find a recipe for what I need, so I am asking for help. I will be loading 158 gr JFN-Berry's-Using Alliant powder American Select-None of my resources have this combo. Any suggestions? or keep buying books?

I have a question on powders and weights. I loaded some .38sp +p with IMR 4227. The load data sheet said 11 grains of powder. I then got some Hodgdkins Titegroup and for the exact same bullet, it called for 4.3 gr max. The fps was 56 fps less on the titegroup. My question is why is the...

I have bullet length gauges for 9mm .223 and .45 from Lyman, but I cannot find one for .38 or .37. Any suggestions for a quick check gauge?

I am using Hodgdons 4227 powder and went to their load data site and found a Max load of 11 grains, but the minimum field is empty. My Lymans 49th doesn't even show the +p and my Lee manual shows the +p but not the powder I have. what do I do in this situation? Buy more manuals?

I am looking at buying a pellet gun, but not sure which way to go. Electric, pump, etc. Does anyone here have any advice?

I see Grafs has 12k of these for $284.00. This seems very cheap. Are these federal? Are they any good? Can I use my Lee Ergo hand primer to install them? thx

Has anyone else ever dropped down to single stage from progressive? I bought a Lee Pro 1000 with all the goodies-bullet feeder, multi tube assemblies, shellplates, etc but just could never get it to work right. I bought a single stage Lee press and really enjoy it. Yes, I cannot produce hundreds...

Can someone double check my specs? I know it is asking a lot, but I just want to make sure I am right on. Bullet 158 gr Berrry's .38sp Weight of empty and deprimed cartridge-4.15 grams .1465oz 64grains Weight of cartridge with just primer 4.46 grams .1575 oz 68.8 grains Weight...

I finally got my case feeder to work, the shell plate lined up, the sizing and decapping die moved to the proper threaded hole, because in the first 2, the cases would not go in, finally got the primers to feed, but now, they will not go over the primer installer pin. Its as if the pin is set to...