I have been wanting another bolt action for 500+ yards to accompany me to the 1,000 yard range. Making a trip for over 2 hours one way just to have one rifle to shoot seemed boring. That’s my story and I am sticking to it!
I also wanted to stick with 6.5 Creedmoor. loading would be easier...
Its been a while since i posted on my rifle build and today i confirmed my final load. My previous post found here https://www.thehighroad.org/index.php?threads/signs-of-accuracy-new-shilen-barrel.887540/
As it turns out my build is very accurate. More accurate than i am on most days. The...
I was planning on waiting to do a review when I had a load developed to share what i thought about my new shilen barrel but i figured i would go ahead and share todays results.
Some details about the rifle. Savage 12FV that started as a 308. I took the stock off and set it in a stealth chasis...
I am a little behind on the review for My Tanfoglio Wintness Elite Match in 10mm. I am closer to 6,000 rounds at the moment.
As far as round count goes I should have been here a lot sooner but I dont take the Elite Match out as often because I hate chasing brass for one. For 2 tired of loosing...
Processed the final #250 223 cases today on the Frankford Arsenal case trim and prep center today. It took just 25 minutes to trim, chamfer, and de-bur. I manage a case every 6 seconds and 10 every minute. Not bad i think.
In total i have fully processed #815 223 brass with it since buying it...
Doing a poll to see who shoots what! What caliber, bullet weight, and what bullet profile? Not on the list?
Right now I cast 5 calibers but only 4 are on the list. I have cast #3 9mm profiles and 3 bullet weights, #1 10mm/40 profile, #1 38/357 profile, and 2 45 caliber profiles and 2 bullet...
Well its all about the wait on the weather to cooperate and some final accuracy tests on 3 loads i developed in 308 with 168gr hornady ELD match and 175gr SMK using 3 different powders. Two of them have the most promise for extending the legs a little.
Just today i just finished the build that...
I have done a lot of searching and price checking. Read and watched reviews on many scopes. Right now I am budgeted and have the need for a scope soon for my Savage 12FV sitting on a MBT Stealth chassis. I have a buttstock upgrade in the mix as well as a new single stage press, etc.
The plans...
New strait wall hunting option for the AR platform? Looks like it packs a good punch. Interest is peaked a little.
Seems to me they wanted to have an alternative to the 450 Bushmaster.
https://www.outdoorhub.com/news/2019/01/21/shot-2019-winchester-new-350-legend/
Well I first thought I was going to leave this rifle alone. Savage Model 12FV in .308. It shoots pretty good in the original stock. But I just hated the "chin weld" and needed a good cheek weld. I thought about slapping one of those Kydek Cheek riser kits on it. The one where you have to drill...
Have an issue with ( myself for one) with my formed 300 BO brass. I used a Lee sizi g die and somewhere in all the reading prior to forming my own brass from cut down 223 i missed this http://www.300blktalk.com/forum/viewtopic.php?t=89334
So in my boggled mind i was trying to figure what is...
This post could be made a part of reloading section since i only shoot my loads but im not sure what is going on so i thought i would start by process of elimination.
Some background on the ar15:
Anderson Lower. Everything else is AR Stoner including the LPK. I built the lower but the current...
Warning pic heavy!
I've been planning this project for a little while and for the past several days I have been working on it. I have a Model 70 with a Synthetic stock and blind mag. I wanted to put a wood stock and bed the action with Devcon. My first thought's were using a Boyd's stock to...
Opinions needed. I've finished a stock that was virgin wood but never re-finished a stock. I have an oak table and it came out well with stain and clear.
I have a Project I'm starting to Bed and free float (if need be) a Model 70 Walnut stock. I figured the stock needs touched up or refinished...
I almost abandoned the idea of another bolt gun and went with an AR. But I figured I can get an AR anytime with the current market and I can grab one later this year. Have one picked out...nothing special. just a basic M&P sport II with a half dozen Pmags.
I'm planning a new bolt gun purchase...
We all have those good days and bad ones. Today was a good day!
I have been in the process of working up my first 270 win loads for my model 70 Shadow. What i never dreamed of was such small group with reduced loads! 1.25" group! Fluke? Cant say for sure but the loads with 46gr of 4064 were...
I am in a position where space and resources are limited. I needed a better way to check powder drops without a light source. So i slapped this thing together temporarily and it works.
However its not a real improvement over a visual inspection and a good light source. But if i change...
I guess most know about the Serbu RN-50 by now if you watch shot show coverage. (note: i missed this one) But for those that don't, well now you know it exists at least!
I guess Serbu got together with a YouTube celebrity Royal Nonesuch. If your a Youtuber and follow a few of the gun guys out...
Looking for some your favorite loads for 270 Winchester. Including bullet weight, type, powder.
Also what range are you loading for and accuracy sought and acquired in those loads. If just 100 yd plinking or 400 yds hunting? Share it please including primer or preferred brass. Thanks...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.