Search results for query: *

Has anyone tried IMR 4831 in the 6.5 CM

The case being the same, except for bullet diameter. Can the 6mm CM MIC be used for the 6.5 CM?

Thanks to all for the information. Had a gunsmith recheck heads pace and scope chamber and bore. All checked out okay, it's going back to Savage. Hopefully they will throat it to cycle the longer bullets.

Hornady 103gr, 105gr, and 108gr

Hornady 103gr ELD M, Hornadt 108g ELD, Hornady 105gr HPBT

Headspace is good, Ticks me off to buy a rifle and can't even shoot factory loads.

Hope someone can help. I have a new Savage 110, tactical 6mm Creedmoor, never shot. Hornady OAL for the 105gr BTHP is 2.790. Factory loads will not chamber. I used the Hornady length guage and have 2.565 to lands, with the 105 BTHP. One big difference. Any suggestions would be appreciated.

Sorry, my bad. I am trying to do optically center.

Did mirror zero on two scopes. Cross hairs lined up great but, both elevation adjustments are at the low stop. What am I doing wrong? HELP!

Thanks Ruger I'll give a try.

Having a problem with tight primer pockets in Creedmore 6.5 brass. Can't get uniformed started. Thinking they are crimped. Has anyone had a similar prodlem?

Expander is very tight. Cases have been reloded five times and never had a problem. Readjusted them per RCBS instructions and still have the problem.

Expander coming out very heard. Same cases, loaded four times. Never had a problem with the dies or cases before. Readjusted die and recapping pin, same problem. Anyone have any ideas?

It is the RCBS Ram Prime. RCBS is sending the rod holders, and I have the rods with a bench primer. Will give me a great back up primer. Thanks for your help

Picked up a box with several dies at garage sale. One screws into press with shell holder on the top of the die.my first thought was the upper half of an military crimp remover. Anemone have any ideas?

I hit an garage sale and bought a box of several dies. One screws to press with shell holder on the top of the die. The first thought was a military crimp remover. Have you guys got any other ideas?

Thanks jmr40, sounds like I'll be loading them. Don't think I'll have a load worked up for this season, but will give them some range time. Thanks again.

My son gave me a box of ELD-X 145 gr for my .270 win. Has anyone had any good results loading them.

My son gave me a box of ELD-X 145 gr for my .270 win. Has anyone had any good results loading them.