Search results for query: *

I'm leaving the .380 auto caliber behind and used the lee depriming tool to deprime about 800 cases with unspent primers. Is it safe to reuse those primers, and would you expect them to be reliable? Thanks.

I bought a set of Lyman 9mm dies. The sizing die comes with a solid decapping rod, but there is no lock ring to lock it in place. How do you set the depth of the decapping rod, if there in no lock ring? Thanks.

I would appreciate advice on my .223 reloading. Bullet velocities are not up to those listed on the Hodgdon website: 2582 to 2738 fps. I'm wondering if the difference is completely due to using a 16" barrel instead of a 24" barrel, or I am a making reloading errors? My barrel has 1:7 twist. I'm...

I have heard nurmerous times that shooting steel cased ammo can possibly damage your extractor. Anyone have any first hand experience with this being true? Thank you.

I observed some movement in the dies when reloading with my Hornady LNL. A close inspection of the press shows some wear where the bushings lock into the press. Photos below are of the die slots with the press turned upside down. Some of the bearing surfaces appear very worn and some appear...

I'm looking to buy a larger gun safe, and I don't have a basement or garage. The safe would go on wood floors. (Hardwood over plywood over wood joists.) So how heavy a safe can I install without risking any structural damage such as warping? Thank you.

Anyone seen or bought a Snapsafe Titan Gun Vault? It is similar to a Zanotti modular safe. Is it a quality safe? Thank you.

So I just shot my first rounds of .223 reloads: Of the three different loads, all grouped equally well. So how do I decide which load is best when reloading more rounds? Thank you. Montana Gold 55g FMJ OAL= 2.25 + - .005 Lee FCD Coax Press Made on 7-7-11 25.5 g BLC-2...

I am considering purchase of a target 22 pistol. I have read that the Ruger's are a good choice. Would I want a Mark II or Mark III gun? Also, I read that Rugers are a PITA to disassemble. How much trouble are they to take apart and reassemble? Thank you.

I have a Hornady LNL. Like many users, I find that the priming system is the weak link causing most of my time consuming problems. So I keep wondering whether the Dillon 550B works better in this regard. Is the priming system on the 550b a better design making for fewer problems? (I don't...

What is going on mechanically when someone limp wrists a gun that results in malfunctions? Thank you.

I have been looking to buy a Benelli M2 shotgun. What is the difference between the Italian version and the American version? Is the Italian M2 better? It appears to have a nicer case. Thank you.

I have an Arsenal SA-M7 for sale. It is a post-ban gun. (no flash suppressor or grenade launcher). Someone in California wants to buy it. He says it is legal, if I take off the pistol grip stock and just include it in the package with the gun. Is he correct or not? Thank you.

I assume at some point in the United States, there were no laws restricting people from carrying a concealed weapon. When did states start making concealed carry illegal and what were the reasons? Thank you.

Anyone familiar with the Just Right Carbine? Any thoughts or observations on this gun? Thank you. http://www.emf-company.com/store/pc/THE-J-R-CARBINE-c268.htm

What is an average cost to reload .223 Remington with 55 grain bullets, assuming you purchase used brass? Thank you.

If you pick up pistol range brass (9mm,40SW,45acp) and the primer is gold color and not silver, can you assume it is once fired brass? Thank you.

Can I lubricate the ram and linkage directly on my Hornady LNL AP and not use a grease gun with zerk fittings? Does it make sense to lubricate the LNL this way, or should I buy a grease gun? Thank you.

I read on this forum somewhere that the Redding expander dies are based on the Lyman M expander die design, and that both of these dies work especially well. Can someone tell me about the design, and if we are talking about a better mousetrap? Thank you.

You can send money to people thru Gunpal. Does the recipient of your funds also have to have a Gunpal Account? Can you send money from from your Gunpal Account to someone's Paypal Account? Thank you.