Your 6920LE is 16in. Knock about 100-200fps off the factory load velocities. They are usually rated at 24in barrel.
Great gun. A female friend has one.
R15, Varget, Benchmark, AA2230 will take a Hornady 75gr to 2900-3000fps in a 20in barrel. Many factory loads that use the 75gr Hornady BTHP match bullet are much slower, like 2750fps in 20-24in barrel. Work up from min to max in .3gr increments and stop when you have pressure issues or find the...
I completely agree on Redding's prices. 281$ for a competition die set? That a ton more than their T-7 press. Lee collet die has better runout than button die. And the Forster is same tech as the Redding seater die. I'd also be interested in Wilson die and arbor press.
I run the Redding comp...
FTX bullet is a good idea still. But the 30-30 FTX doesn't have as nice a BC as the 308 Marlin version. Not sure the Marlin version would work as far as the cannelure.
I used Varget for 125, 150, 200gr bullets. Great accuracy in a custom barreled M98.
Hodgdon likes H4895 in their data.
Nosler data for 200gr bullet with IMR4350 is the stoutest looking data I've seen for 8x57.
I was able to get some 40 bullets. I see Alliant max load is 9gr of PP with 155gr Gold Dot, Nosler data is not supporting PP, and Lyman book shows 8gr max load. 1gr is quite a bit of difference for auto pistol. What are ya'll running?
I also have Unique to use.
My Thumler model D showed up after months of backorder. Works as advertised with Dawn, Lemi-Shine and SS material. I ran some .223 that was mix of like new to very corroded and all of it came out like new in about an hour. The machine is very quiet. I won't use my Lyman except as backup.
My brother just put an Laser Genetics ND3 laser designator on his 7mm mag BAR.
I would get a rifle that can mount some night optics solutions. Hogs are very active at night.
He also live traps them and puts them down with Browning Buckmark pistol in 22lr.
Well I bought a 3BR some time ago and finally got a chance to use it. I have been using RCBS Chargemaster for several years and was content except for the speed. I wanted to make some .223 z-max with Benchmark and the powder drops have been phenomenal. I am getting consistent 25.4gr drops. It is...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.