If The Brass Was Fired Out Of A Different Rifle It Must Be Full Length Resized Which Basically Forms It Back To Factory Specs Once You Fire Out Of Your Gun It Forms To Your Barrel Chamber And Then Only Do You Neck Size Only Usually When You Full Length Size It Stetches The Case So Check Your...
I Second Walkalongs Theory Listen To This Guy Although I Try To Keep All My Brass The Same Length For Crimping Reasons I Trim Mine From 1.750 To 1.755 Better Safe Than Sorry Good Luck And Take Your Time
I Use Hornady One Shot In A Spray Form And I Love It I Used To Use Dillon Spray Lube In A Pump Spray It Does Disapate Well So That It Dries Up Keeps Media Cleaner
I Trim My Brass 1.750 To 1.755 Max Is 1.760 Thats From Hordady Overall Case Length When Done Is Very Important I Dont Think 5 Thousandths Below 1.750 Is Critical As Long As You Have Enough Crimp On Your Bullet And Can Still Maintain Overall Length But Thats My Theory.
Well Every Rifle Shoots Different Even With The Same Twist And You Have To Break In Your Barrel And Handloading Vs Factory Loads Can Make A Differance Lots Of Variables You Will Have To Try Different Loads And See.
I Use The Same Method On My 223 Brass Make Sure The Case Is Right Up Against The Closed Part That Holds The Case And When You Put The Cutter In The Case If You Are Not Straight Or Up Or Down With Your Cutter It Will Cause It To Come Out Try To Keep The Cutter As Straight As Possible With Case...
Well Gloves I Guess Arent So Bad I Want My Brass To Look Good Feel Good And If Its Going In My Weapons I Want It To Be Clean As A Whistle I Will Have To Try The Auto Wax And Vinager Trick You Only Feel As Good As You Look GLOVES ARE A MATTER OF PREFERANCE WASH YOUR HANDS AFTER DEPRIMING AND PRIMING
A Little Patience Until You Get Cofident With Yourself And Your Equipment You Use To Reload And Learn Its Capabilities As Far As Accuracy, For Myself I Deprime First Then Trim And Then Tumble Then Buff. After Its In Tumbler I Use Rubber Gloves To Handle The Brass Until It Is Fully Complete In...
I bought once fired brass and used the full leght rcbs dies to deprime and resize at the same time. my question is I have a Sabre 223 ar 15 when I resized all that 223 brass with the full length dies beig the tolorance for a semi auto is less when feeding vs bolt action do i have to resize all...
I Was Just Going Off Article And Hell It Might All Be Bull Crap I Guess It Rubbed Me The Wrong Way Made It Sound Like I Was Lying I Dont Know Enough About Anything As Far As Weapons To Be A Good Lier No Hard Feelings And At Least You And I Got The Balls To Talk About It And Move On I Will Stay...
Must be a misprint check it for yourself savagearms.com/centerfirearticles.htm maybe will learn something about sarcasim by the way I thought this was a sight to help all not critisize and belittle peoples post by the way if you read the article like I have you may learn something 0.50 at 100...
I Just Put One In Layaway And It Is Absolutly A Beauty Laminate stock say they are hard to get. they arent cheap they come with a price tag of around a 1000.00 bucks stats are 0.88 at 500 yds shooting times article april 2007.
Pacific Missouri there are lots of deer that is close to Times Beach and the meramac river lots of dog size deer good luck go up to northern missouri for real big deer.
GO TO Savagearms.com/centerfirearticles.htm look at those articles if that doesnt work see if you can go to shootingtimes.com and see if you can look at a back issue of arpril 2007. I just put a savage model 12 f/tr in layaway but they are hard to find i got lucky
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.