Search results for query: *

I have a decent old long barreled tube feed jc higgins 12 gauge,it shoots brass end shells fine most of the rime..no problem,but usually all I can find are aluminum end,they are finiky as crap,anyway I'm gonna have the barrel shortened,beed reinstalled,but can the tube and lifter and stuff be...

I have a short 20" barreled nitro special that only fires the front trigger,right barrel,the back trigger just pulls back no click,both firepins are free and pop in and out of receiver,how do I disassemble this critter, thought I might try to fix it,ive repaired a few junk pumps in the past...

I picked up a little glenfield 75 carbine,looks like a m1 or ruger 10/22 kinda, in rough shape missing the stock to receiver screws,gummed up action,wouldnt fire,anyway got her took apart cleaned up ,refinished stock,action screwed down into stock,it shoots now,but on 3rd sometimes 5th round...

I have a 20 gauge Mossberg 185 d/b bolt gun for varmints, real handy but after I fire it it ejects the magazine a little ways, and wont pick up the second shell unless I hold it in,which aint no big deal really,just thought someone might know if its the magazine catch or the magazine. I found...

question on repairing a springfield 67e pump arm bracket.finally getting this stubborn thing apart,can the pot metal brackett be heli arc welded/or somethin, or search for a new one.thanks.

ok im gonna trade my .38 for a .357,the blue smith 27 is 350.00 pretty good shape,almost new stainless gp100 ruger 399.00,and a dan wesson .357 ,tool ,box, blue for 375.00 ,older one but like new,i think the d/w might be a model 15,adjustable sights,fancy wood grips,big dw on them,which is the...

got a revolver that has been in the family a long time,cousin passed away,looks never shot has spesco corp. and a falcon head,made in brasil, forjas taurus s.a on barrell.pearl grips and a four inch barrell,the trigger and hammer has case hardening,beutiful blueing,i am assuming a early...

just wondering if a .40 on the open slide platform is a decent firearm,92 or 96 im not sure,also it has no hammer.doa i guess,never seen any berettas under 300.00 this ones 279.00.i am wanting a little longer barrell .40 then my firestar .40.it shoots fine,been shooting a old remington rand .45...

can anybody tell me if i can get a 18 or 20" barrel smoothbore for a new pardner pump i have.im a dummy and didnt realize i bought a rifled barrell one.i liked the short 20 or 22" barrell and rifle sights.but the inside of barrell is rifled.my mossberg 24" with rifle sights was a...

well i traded into a new maverick 88 on the cheap but it"s forarm is not a corncob its like a mossberg 500 standard wood but black synthetic and it does have a nut on the end,does that mean i can change to wood pretty easily.since it has the nut .thanks.

i have this old stevens browning 620 with a 20 inch barrell,gunsmiths checked it and said fire away.has a ringtail pump arm.blue on reciever 60 or 70 percent, rest kinda plum brown with barrell 50/50 same,light rust cleaned up easy 4/0 steel wool/oil. 23/4 only,feeds and ejects with...

well i traded into a mossberg 500a dual barrell kit new in a box today.anyway both barrells are ported 28" and 24" the 24" says slugster on it and it is a smoothbore ,not rifled ,with rifle sights,doublechecked,ok i know i can shoot slugs through it but i can shoot buckshot too,correct? so i...

have one of these that the wife can handle pretty easily. all stainless real tight lockup but i read that you cant shoot +p or jacketed ammo in it.anybody heard that,well seeing that i just bought reminton/umc 130 grain full copper jacket at walmart for 14.00 a 50 will it be ok for us to...

ok,how in the heck does the pin pull out, to pull the cylinder to load the thing,is there something i"m not doing right ,it is a 1970 model has the what i thought was a loading gate,till the shells jammed up.pistols like new,i just cant pull the pin out,it starts,then stops.about 1/2 inch or so...

got into a mossberg 500a that had been in a sofft case for a long time,never shot.the barrell was horrible rusted ,cleaned it up,fairly well ,but spotted all up,it is a 28 inch vent rib the end of the barrell is pretty scarred up and the vent rib has been hard to get the rust off,it has dual...

can anyone tell me what it is a copy of , a maverick 88 or a mossberg 500 it has a 30 inch vent rib full choke barrell,i am wanting a shorter buck/slug barrell just wanting to know what fits,thanks.

smith wesson 916t,well i couldn"t pass up a pump 20 gauge in decent shape for the price ,needed cleaning real good,only holds two up the tube.but fires and ejects fine, i now know that some people dont care for these s/w shotguns .me and my brother had one 20 years ago,didnt miss a beat. 1st...

well for my fathers day present my wife ordered me a 15.5"total length 10" blade, unp/handy siripati rough use/finish khukuri,still looks cool,antique looking,satin blade finish,dull brass,coming from nepal,shipped already,can"t believe she did that for me.does anyone know if khukurihouse kami"s...

i never knew this company made any rifles,it looks new,synthetic stock,nice scope,didnt see maker,smooth bolt,looks never shot, in 30/06 but for 200.00 for a 30/06,anybody ever shoot one.

i picked up a realy nice sporterized argy 1891 deutshe waffen berlin, i"m assuming 7.65 ,nice bore,wood, but except for the fore/wood being shortened and 16 3/8 barrell, 41" total length, i thought the barrell had a bulge but it is like a step down/thick to thinner,hope that makes sense, 8.5...