454 casull

  1. Obturation

    Low power 454 casull loads.

    Hey all, Tinkering with some 454 casull loads that are more than 45 colt but less than the ruger only 45 loads. Use is plinking mainly but ideally a 250-300 grain HC @ 1000-1200 fps. I have a trailboss load (250 rnfp over 9 grains of trailboss- taken from hodgdons website) that shoots well and...
  2. Obturation

    My first Freedom Arms revolver.

    Hey all, Back in November I created a thread asking you all if I should buy a new BFR in 500 JRH or wait on a possible (probable) deal on a Freedom Arms 83 in 454 casull from a guy I knew would need winter money (carpenter, happens every year). I was dead set on a big bore single action. At the...
  3. Obturation

    Super blackhawk bisley owners?

    Hey all, As some of you may have seen previously, i am allowed (by wife rule) one, yes one, firearm purchase per year. I discussed before possibly waiting on a great deal on a FA model 83 with a 10" barrel that i can get but would need to wait until a friend inevitably needs money this winter VS...
  4. Jessesky

    Rossi 94 454 casull hammer following bolt

    Hey guys, I purchased a Rossi 92 this August. The rifle is in 454 casull and in the little 4.7lb gun it kicks. So much so that it’s causing issues with the gun. First day on the range, work the lever as normal and I fire one shot. Now the lever won’t cock the hammer all the way, but I can...
  5. Jessesky

    44mag sectional density?

    I hear all the guys at the gun shop boast how if you want a gun for woods defense “you’re gonna need at least a 454”, or “I’ll only carry my .500” (which I think is ridiculously impractical FYI). This defense includes everything up to the biggest of North American animals, and that means...
  6. 243winxb

    One of the Worlds Most Powerful Revolvers get Lift From Aerospace Alloys

    I found this interesting as to what alloys are used. https://www.cartech.com/en/alloy-techzone/technical-information/success-stories/one-of-the-worlds-most-powerful-revolvers-get-lift-from-aerospace-alloys There is a lot more at link. This is just part of it. Ruger's goal was to develop the...
Back
Top