62gr

  1. N555

    223 5.56 , M855 62gr FMJ , W748 and 2460

    Next load development will be 62gr FMJ BT, but probably not true M855 ballistics, loaded for accuracy. A Carbine and rifle load. My 2 powders will be W748 and AA2460 and cci41 or cci450 primers. My speer manual shows 25.5gr as the max load for 748 in a 223 chamber gun so if I don't get any...
  2. J

    5.56 XM856 Tracer load data

    I have some XM856 62 Gr "Orange Tip" air pulled projectiles. Looking at my reloading manuals I have NO data for these to nobodies surprise. I didn't think I could use plain-jane 62gr FMJ/GreenTip data because of the bullet profile. The 62gr tracers are significantly LONGER than my 62gr...
  3. B

    Hornady 62gr BTHP w/ canelure not in my Hornady reloading book. Just add some powder to 60gr recipe?

    Hello guys & gals, So I bought these 62grs here: https://www.midsouthshooterssupply.com/item/001532276c250/22-caliber-point224-diameter-62-grain-bthp-with-cannelure-250-count But the closest weights I have to these 62grs in my Hornady reloading book are 60gr or 68gr. Should I just do some...
  4. B

    AR15 break-in procedures? 55gr out 1/7 SS barrel ok?

    Hello guys & gals. Just got my 18” Stainless Steel upper from PSA. All I have at the moment is some 55gr FMJ Wolf I got in bulk a year or so back. I was just wondering if there’s anybody out there of the mindset, “weeeeeell... since it IS Stainless Steel, 1/7 twist, the first couple hundred...
  5. Z

    Hornady 62gr BTHP

    Does anyone have an actual shooting load for the Hornady 62gr BTHP w/can? Some info would say 24.0gr of H335 is good, any others?
Back
Top