9mm

  1. merlynski

    90 gr .355 Sierra Sig Sauer V-Crown JHP in 9mm?

    Has anybody used the 90gr .355 Sierra Sig Sauer V-Crown Bullets Jacketed Hollow Point in a 9mm loading? What powder and charge? What pistol? (I know, it's a .380 weight bullet)
  2. K

    9mm neck expansion die for 380?

    Just for background: 380 dies are nowhere to be found right now. I load 9mm and 38/357 and wanted to start reloading 380 ACP. I am partial to the Lee carbide die sets and would be happy to buy a set if anyone knows a place that is selling. My question is whether my 9mm dies could be used for...
  3. tl511

    Need help adjusting Dillon 750 for OAL

    New here! Reaching out for help from some reloading experts. I have only been reloading for about 2 years. Just upgraded my press to a Dillon 750 with a bullet feeder. My issue is that I can’t seem to get it dialed in to get an appropriate OAL of my 9mm. Seems to be one of a few factors that...
  4. M

    Clandestine 9mm loads

    Got a new toy. It's my plandemic osprey9 sealed and recoil boosted. Who'd da thunk the plandemic would still be going strong a slow tax stamp later? (13 or 14 months, my slowest of 6 form four silencers by far) The gun is a Beretta 92fs. To really test out this new fangled Nealon device silencer...
  5. M

    9mm deer load

    The gun is a mark2 semi auto sten. I have worked up a load that's kind of impressive. 11gr of AA9 compressed, with a small rifle primer for 124gr. It's a half grain over the max, uses small rifle primers. Velocity is about 1,580 +/-10 feet per second out of a 9.5inch barrel. Accuracy is between...
  6. Alex G

    9mm Neck Tension Issues (random)

    Hello All, I know this question may have been asked before in past threads (and I spent the last hour reading them) but nothing seems to have addressed my issue. I’ve also been loading for 6+ years without any issue like this. A bit of background specs before I begin: Press-LNL AP Sizing...
  7. M

    Shellshock technologies 2 peice brass free cases.l

    Anyone ever use shellshock technology 9x19 cases? They're the 2 peice ones with a nickel alloy case walls and a thick aluminum webbing. I found a thousand new unprimed shellahock cases at a show for about the same price as 1x fired, mixed head stamp, still has the spent primer range trash, I...
  8. Harriw

    9mm Load data for 115 Gr Coated Lead Round Nose

    Hi folks, I love shooting RMR's "MPR" jacketed HP bullets in 9mm. But they have their hands full trying to keep up with a huge backlog at the moment, so I thought I might let my stash of MPR's sit on the shelf for a while and try shooting some coated cast bullets for a change instead. they're...
  9. ReggiesFree

    Cor-Bon, Buffalo Bore, Honey Badger & Double Tap Ammunition?

    Hey Studs, Received a notification a few minutes ago from a great friend. Offering some really Pre-Covid price on about 150-200 rds each the above listed ammo. I have relegated myself primarily to Speer 124gr +P, 147 gr, Federal HST +P/None +P, my remaining Hydra-Shoks and Remington Golden...
  10. ReggiesFree

    HORNADY CRITICAL DUTY +P 124 GR 9MM VS 135GR +P??

    Have any of you noticed any substantial difference/performance between the Hornady Critical Duty Luger +P 124 gr FlexLock vs the +P 135gr version? I am more concerned from 3 inch barrels. I cannot find penetration or expansion ballistics on the +P 124gr. Yet, info on the +P 135 gr is...
  11. GlobalMapper

    Junkyard Load

    Hello All, Like many of you I am running out of supplies with no relief in sight so I'm digging around and trying to conjure up something useful with what is remaining. I have 500 rounds of mixed headstamp 9mm and 1LB of TiteGroup so I prepped and primed the cases with CCI 550 magnum primers...
  12. CopperFouling

    Starline 9mm brass

    Has anyone ordered 9mm brass from Starline recently? Not surprisingly, it's backordered, and I am just wondering how long the backorder is. There's still lots of brass in my reloading room, but I was thinking about adding some more.
  13. CopperFouling

    Speer 9mm 124 gr. TMJ

    So I am starting to run a little low on 9mm bullets. My favorite bullet is the Speer 9mm 124 gr. TMJ (Speer part number 3993), as that is what I have been loading for a few years now with good results. Not surprisingly, all the retailers that usually stock them are out. Has anyone seen these in...
  14. wst38tx

    Overpressure potential of substitute bullets in reloading 9mm

    I’m concerned with safety issues to reload 9mm Luger. I’m new to the 9mm, but not reloading. Unlike other rounds (like 38Special) the 9mm case has nil excess chamber volume. As we know: 1) Published loading data references powder, bullet (style, brand and weight), and COAL. 2) I’ve read the...
  15. J

    9mm case capacity w/ JHP in CZ

    Relatively new to reloading, especially 9mm: I recently received my 9mm RMR 124 gn TCFP match winners and 124 gn JHP wanted to run my thought process by those more experienced: I’m using Win231, have had great success with 4.3 gn behind Berry’s RNFB at 1.14” in CZ P01. Got the RMR’s behind good...
  16. B

    Missouri Bullet Co - SWC starting loads

    I picked up a little over 200 cast lead bullets the other day. They look to be a SWC from Missouri Bullet Co. 0.355" diameter, they weigh in at 126 gr. I'm wanting to load up a light to medium range 9mm load using them. What is a good starting load? My only pistol powders at the moment are...
  17. 748

    Lightest load that will cycle Beretta 92FS

    The fastest burning stuff I have is winchester super lite, with a burn speed somewhere in between reddot and bullseye. Normally I'm not loading reduced pistol loads, until now with 9mm I load them with unique in the middle to upper range and something like AA9 for +P and a spectacular muzzel...
  18. ScubaSteve99

    Star BM 15 Round Magazines

    Hey y'all, I made a fun discovery yesterday! With small modifications to a Hi Point carbine mag's feed lips and mag release cutout, I was able to have it fit nicely in my Spanish Star BM! I have attached pictures of the modifications and the mag in the gun. Gonna have some fun next range day!
  19. W

    Springfield Range Officer magazine issue

    While I have limited range time and no malfunctions with the Range Officer 9mm, I am concerned that the magazine seems to barely be holding onto the next round after cycling. When I eject the magazine after chambering a round, a round always comes tumbling out after the magazine. Has anyone...
  20. American_Fusilier

    Glock magazine followers

    Hello, I have a Glock magazine question. I've got some gen 3 Glock 22 magazines. I know you can shoot 9mm out of a G22 mag as it comes. But if I warned to put 9mm followers in these 40cal mags, which followers could I use? I'm guessing not the orange gen 5 ones. The other followers I've come...
Back
Top