n110

  1. gilgsn

    45 Colt Loads With Vihtavuori Powders.

    Hello. I tried my new Garmin Xero chrono today, and it didn't miss a single shot! Here are the results for .45 Colt: .45 Colt. Gun: Uberti El Patron. Barrel: 4-5/8" Primers: CCI300. Bullets: MP Mold 454-423 & RCBS 45-270-SAA. Powders: Vihtavuori N340 & N110. CAUTION: Some of the following posts...
  2. RET15

    HELP: 300BLK Subsonic Load Data for Lehigh Defense

    Hello all, Really hoping to tap into some of your firsthand guidance on a good subsonic load for Lehigh Defense ME 194 grain over VVN110 with CCI small rifle primers and new Starline brass. I’ll be using my hand built AR with 16” barrel, 1:8 twist, pistol length gas, and a Q Full Nelson can...
  3. 2

    357 Mag - 158gr Berry's OAL?

    Hi all - I'm loading up some 357mag using Berrys 158gr plated round nose bullets. I've loaded Berry's 158gr plated flat points to 1.575" before and they worked for me. If I load the RNs to the same OAL they will be seated deeper and (presumably) have a higher pressure when fired. What's a...
  4. WelshShooter

    .30 carbine // 110gr H&N Plated Bullet

    I've had some good success loading 110gr plated bullets made by German company H&N Sports for my M1 carbine and thought I'd share my success with others. In short, the recommended 12.0gr Viht. N110 load worked very well for me. This load is around 160fps slower than my FMJ load but after...
Back
Top