Having trouble with a new Remington SPS, bolt action in .243 Win.
Trying to build up some deer loads, and most of the rounds chamber very tight, and when ejected (un fired) have a bright ring on the headstamp where some brass has been rubbed off on the face of the bolt. These have been full length re-sized and trimmed to length. Bullets are seated ~.010 from rifling lands.
All of the dimensions measure w/i tolerances. I am using new W/W brass and wonder if the rim is a bit too thick. Plan to change brands of brass and see if that helps.
Any thoughts / suggestions are appreciated.
Trying to build up some deer loads, and most of the rounds chamber very tight, and when ejected (un fired) have a bright ring on the headstamp where some brass has been rubbed off on the face of the bolt. These have been full length re-sized and trimmed to length. Bullets are seated ~.010 from rifling lands.
All of the dimensions measure w/i tolerances. I am using new W/W brass and wonder if the rim is a bit too thick. Plan to change brands of brass and see if that helps.
Any thoughts / suggestions are appreciated.