Universal works well in 9mm, works good across the recommended charge range, but not as much velocity on top as some other powders if you care about that.
Nothing wrong with Lee data but is it a reprint of data from somewhere else.
Here are some numbers for Universal with the new RMR MPR 124gr JHP
Mixed range brass, S+B SP, 5" 9mm 1911
Charges as thrown after setting measure
String: 4
Date: 7/1/2017
Time: 11:12:50 AM
Grains: 124
Hi Vel: 1096
Low Vel: 1061
Ave Vel: 1077.4
Ext Spread: 35
Std Dev: 13
4.6 Univ RMR 124 Jacketed HP 1.09
Velocity Power Factor Ft/Lbs
1079 133.796 320.528
1096 135.904 330.708
1070 132.68 315.203
1081 134.04 321.83
1061 131.564 309.923
don't have the data handy but as I recall 4.2gr of Universal was just a hair to light to make 125 PF with the same bullet/OAL.
The 4.6 load seemed fine in my gun, no pressure signs, vels in expected range.
From Hodgdon's web sire
125 GR. SIE FMJ Hodgdon Universal .355" 1.090" 4.3 1031 26,900 CUP 4.9 1118 30,600 CUP
124 GR BERB HBRN Plated Hodgdon Universal .356" 1.150" 3.8 904 26,300 PSI 4.4 1045 33,500 PSI
115 GR. SPR GDHP Hodgdon Universal .355" 1.125" 4.5 1029 27,400 CUP 5 1149 31,200 CUP