SamTuckerMTNMAN
Member
I just received a new RCBS powder scale, the non-electronic weigh scale with a hanging pan on the right. The scale would not zero out. After even adding weight to the pan underside (screw held weighting section) it was still short of zeroing out. I then trimmed a little off of the copper counter weight back near the measuring side (grinder) and adjusted the lead in the pan until getting a solid zero. It's now at zero and seems to work fine. Does anyone know about trimming the copper counter weight ruining the reading? I need to get scale weight checks anyway, but if someone has advice I'd appreciate it.
thanks in advance
ST
thanks in advance
ST