modifying a 12 guage

[poperb]

I was wondering if it were possible to modify a 12 guage Maverick shotgun to a pistol grib shotgun. Just interested let me know there might be a book or a website let me know

 

[USSR]

Please be aware that in addition to a barrel length requirement, there is also an over-all-length requirement for shotguns. The ATF "frowns" upon too short shotguns.

Don

 

[foghornl]

You can buy the pistol-grip only direct from Maverick/Mossberg.

You want part # 95000 MSRP is $24. Firts 12-Ga Mossberg 500's & Maverick 88's

 

[poperb]

one more question

Thanks for the info I am going to get it, what's the legal limit for the barrel and overall length of a pistol grip shotgun

 

[Brian Williams]

Barrel greater than 18 inches from the breachface
overall greater than 26 inches

To measure the barrel;
1. Get a thin dowel and drop it in the muzzle and mark it.
2. Then pull the dowel out and measure from the breach end and mark the dowel at your rough length.
3. Then remove the barrel from the action
4. Then hold the dowel next to the barrel with the muzzle mark aligned with the muzzle
5. Mark the barrel at your rough length.

use your pleasure of tools to cut the barrel. For plain barrels many use a pipe cutter.

Make sure it does not finish off shorter than 18" or the alphabet soup guys might get you.

 

[wdlsguy]

Thanks for the info I am going to get it, what's the legal limit for the barrel and overall length of a pistol grip shotgun

You can buy an 18.5" barrel directly from Maverick / Mossberg.

http://www.maverickarms.com/pages/barrels.htm