Nice gun!!
Yes.
Other OKs:
Polishing that barrel.
Getting more grip behind that backstrap.
and
Asking people if they *feel lucky*.
Todd.
I used this on my 629s from most any auto parts store. Got it for the stainless steel fenders on my Moto Guzzi. Soft cloth and a couple of clean lint-free cloths for final wiping. The differences come up very quickly if you only do portions at a time for comparison.Polishing the barrel? How?
I used this on my 629s from most any auto parts store. Got it for the stainless steel fenders on my Moto Guzzi. Soft cloth and a couple of clean lint-free cloths for final wiping. The differences come up very quickly if you only do portions at a time for comparison.
I think most fellas here on THR name *Mothers* as their go-to.
Todd.
View attachment 887622
I used paper towels for the actual application and buffing using the compound and then wiped it over at the end with the lint-free towels. Though some (possibly correctly) feel this is counter-productive due to some paper towel qualities.So you only need a few lint free car polish cloths?
And it won't harm the gun's finish at all?
I used paper towels for the actual application and buffing using the compound and then wiped it over at the end with the lint-free towels. Though some (possibly correctly) feel this is counter-productive due to some paper towel qualities.
It works in very nice stages without harming S&W's stainless.
The first go-over addressed the handling. Later, when I chose to do it again it eliminated holster-wear and lastly the S&W surface imperfections, which would never have been present in the old days of factory polishing, go away.
No harm at all unless one is bothered by the variation between polished and unpolished if done in stages as I did.
Easy to do while watching TV, the fire-place or rocking on a porch.
There are a couple-few threads where fellas have shown before/after of their pistols. Sadly, I have no comparison photos of mine.
Todd.
I'll try to get good photos of the one partially polished and the one not touched but confidence in my photographic skills is not high.Apache, can you post pics?
I'll try to get good photos of the one partially polished and the one not touched but confidence in my photographic skills is not high.
Aim1 As far as the polishing lasting, it's really a matter of eliminating the last production marks and imperfections on the stainless and that is permanent. It's not really like polishing wood or a blued gun as that is usually polish applied to a finish for depth and uniformity.
Polishing stainless is more a matter of eliminating surface imperfections like the difference between waxing a cars paint and using rubbing compound to even things out.
Some of the posted photos by others actually look so good as to be initially mistaken for a nickel finish.
Todd.
It really depends upon how well you want it polished.How many hours would it take to polish this gun?
It really depends upon how well you want it polished.
On my modern S&W stainless guns - even an hour makes a hell of a difference. They respond quite quickly. If you only do parts individually - it is really apparent. I started with only one side of the barrel at a time to really get a sense of the difference.
Todd.
Yup. You're not really applying anything long-term to the surface so there is nothing to go away or diminish. Rather, smoothing those thousands upon thousands of micro-abrasions already there.And it should last a lifetime?
I dig a matte stainless too but the half-measure S&W presents now bother me a bit.Never saw the draw to polished stainless steel. I was always partial to a good dull bushed finish with plenty of soot.
View attachment 887763