Fingers McGee
Member
Anyone know where someone could find a couple of the four pointed nipple wrenches for the Uberti Paterson with loading lever?
Paterson nipple wrench
- Thread starter Fingers McGee
- Start date
- Status
Prairie Dawg
Member
yup, dixie:
http://www.dixiegunworks.com/product_info.php?products_id=11460
LL0708 Paterson Loading Tool (For Uberti) $65.00
Works on Uberti’s Paterson revolver only! Differs from other brands because of the unique shape of Uberti Paterson nipples. Instead of the typical two shoulder style nipple as used on most revolvers, the Uberti Paterson’s nipples have a four shoulder design. This tool is made specifically for those nipples. It will not work with other Paterson revolvers and will not fit other revolver nipples. This tool is a must for removing nipples from the Uberti Paterson revolver.
--Dawg
http://www.dixiegunworks.com/product_info.php?products_id=11460
LL0708 Paterson Loading Tool (For Uberti) $65.00
Works on Uberti’s Paterson revolver only! Differs from other brands because of the unique shape of Uberti Paterson nipples. Instead of the typical two shoulder style nipple as used on most revolvers, the Uberti Paterson’s nipples have a four shoulder design. This tool is made specifically for those nipples. It will not work with other Paterson revolvers and will not fit other revolver nipples. This tool is a must for removing nipples from the Uberti Paterson revolver.
--Dawg
OP
OP
Fingers McGee
Member
Dixie is out of stock. So is VTI. Neither expects to replenish since Uberti says they're not gonna make any more - According to VTI
OP
OP
Fingers McGee
Member
Found it!
Found some at Taylor's - well, I didn't, a friend did. $53 & some change delivered. Ordered one last week & got it today. Thought I'd post a few comparison photos of the new Uberti tool and a tool that came with my Navy Arms/Pietta Paterson from 1983.
First photo showing the two side by side. Uberti on the left. The Uberti is slightly larger and heavier than the Navy Arms one.
Anothe picture of them side by side. Uberti on the bottom:
Here is a picture of them with the cap off. You can see that the Uberti on the left is beefier than the Navy Arms tool on the right.
Here's the money shot. Again, Uberti on the left. The cap threads were smooth and even on the Uberti tool. The Navy Arms was a chore to unscrew because of very rough cut threads.
Taylors still had a few of these on hand when I ordered mine last week. When they're gone, they're gone & according to Uberti - there won't be any more.
Found some at Taylor's - well, I didn't, a friend did. $53 & some change delivered. Ordered one last week & got it today. Thought I'd post a few comparison photos of the new Uberti tool and a tool that came with my Navy Arms/Pietta Paterson from 1983.
First photo showing the two side by side. Uberti on the left. The Uberti is slightly larger and heavier than the Navy Arms one.
Anothe picture of them side by side. Uberti on the bottom:
Here is a picture of them with the cap off. You can see that the Uberti on the left is beefier than the Navy Arms tool on the right.
Here's the money shot. Again, Uberti on the left. The cap threads were smooth and even on the Uberti tool. The Navy Arms was a chore to unscrew because of very rough cut threads.
Taylors still had a few of these on hand when I ordered mine last week. When they're gone, they're gone & according to Uberti - there won't be any more.
Last edited:
cheatin charlie
Member
- Joined
- Jan 10, 2009
- Messages
- 70
Fingers,
Thanks for the heads up on the nipple wrench. I just ordered one to go
with my Uberti Paterson. My Pietta Paterson has the 2 sided nipples.
Neither pistol has been shot yet but I am working on my Pietta so I can
shoot it now and again.
Charlie
Thanks for the heads up on the nipple wrench. I just ordered one to go
with my Uberti Paterson. My Pietta Paterson has the 2 sided nipples.
Neither pistol has been shot yet but I am working on my Pietta so I can
shoot it now and again.
Charlie
- Status
Similar threads
