Powder for 124 Grain 9MM RN cast bullets

[Bula]

I like W231 or HP38 (same powder) for my 125g 9mm cast loads.

 

[LUCKYDAWG13]

i use a lot of Bullseye in my 9mm for my cast boolit's
3.8gr of Bullseye in my 9mm under a 125gr castboolit
works well for me

 

[1KPerDay]

I personally use 3.7 grains red dot with MBC smallball. I've gone through 2K of them in my 226 and 92FS. Lovely load. don't shoot indoors, though.

 

[Yarddog]

Unique is a great powder,,, I don't think you could throw two charges without
noticing it... It's a powder that favors the high side of the chart ; )

Y/D

 

[ldlfh7]

I was able to get my hands on winchester wsf so I think I will be using that. Would like to find unique but anything is tough to find right now.

 

[ReloaderFred]

I dropped Unique years ago. I've got 5 powder measures mounted on my bench, with another couple on the shelf. I never could get consistent powder charges with Unique through any of them, and there are other powders that do just as well that will meter much better.

Hope this helps.

Fred

 

[greyling22]

I always had more issues with the real fast powders than with slower ones. red dot and tight group stripped pretty bad for me. wsf is my current best performer.

9 has been tricky for me. if you start having issues, take a look at this link here. http://castboolits.gunloads.com/showthread.php?121737-Setting-up-for-boolits-in-a-new-9mm

 

[area51]

w231 and bullseye are my to go powders....

Can't go wrong with either one. My last load was 4.1grains of 231 with some MBC small ball and they performed really well on my p99 and lc9.

 

[Cheetos]

I currently use Universal for those same MBC bullets. I would say Unique or Universal. The Universal burns a little cleaner.