Products to increse elevation in scope base.

[Corey Thames]

I have a Remington Model 7600 with a one piece Leupold base and matching 30mm high profile rings. The point of impact at 100 yards is 6 inches low yet there is no more upward adjustment in the scope.

What products are out there that will correct this issue?

 

[Varminterror]

Shim and devcon.

 

[MEHavey]

Check this thread
https://www.thehighroad.org/index.php?threads/remington-7600-scope-mount-issues.616462/

Then check/measure that the rings are identical height

IF.THEN . . . pull the scope/rings/unscrew one end of the base -- does a gap appear?

IF/THEN . . . reverse the rings/recheck.

IF/THEN . . . shim the rear of the 1-piece base with 0.005" coke can strips.

 

[cdb1]

Shim the rear of the base. You can make them out of coke cans or call Leupold and they will send you some shims at no charge.

 

[Skylerbone]

Burris Signatures with pos align inserts would be another option.

 

[LRDGCO]

Fillet o'Bud can.

 

[LoonWulf]

My first question would by "WHY is there an issue?".
Check all the things that could cause missaligment of the scope or bore.
Then move along with shimming.

 

[Birdhunter1]

Burris Signature Zee Rings. It takes some finesse but I zeroed a scope at 200 yards and never touched the turrets to get within an inch. I think I had to give it maybe 5 clicks on the windage.

 

[Corey Thames]

I'm going with the Burris Rings.