roval
Member
I've consistently noted that I've had stickier extraction shooting 44 mag 240 gr lswc with a mod load of 10.5g unique vs 240 gr jacketed xtp with 23.3 gr 296 or 19 gr 2400. There are otherwise no pressure signs for any of them.
My SRH even with factory ammo, the one box i ran throught it, has to have the rod tapped sometimes with the base of a magazine to push out the brass.
The 296 and 2400 are much hotter loads but seems to extract more easily. Why would this be? I didn't chrono the 296 and 2400 loads as I mainly measured the shock wave when I tried it in the past. The 10.5 unique is 1235 fps.
No problems with these loads otherwise.
My SRH even with factory ammo, the one box i ran throught it, has to have the rod tapped sometimes with the base of a magazine to push out the brass.
The 296 and 2400 are much hotter loads but seems to extract more easily. Why would this be? I didn't chrono the 296 and 2400 loads as I mainly measured the shock wave when I tried it in the past. The 10.5 unique is 1235 fps.
No problems with these loads otherwise.