RCBS Primer Pocket Swager w/ LCT

Status
Not open for further replies.

2011redrider

Member
Joined
May 3, 2014
Messages
491
Location
Bonners Ferry, Idaho
Did a search and only found one thread that was 1200+ days old, so I will start a new one.

Recently purchased a RCBS primer Pocket Swager kit when Bullets.com was selling off all of their RCBS stock. Didn't know it would not work with my LCT without making modifications or buying an additional primer arm and cutting off the primer punch. The Ram does not retract enough to strip of the round due to the clamp for the indexing rod.

Contacted RCBS about the issue and received a return email from Tech Support saying "Sorry we don't have one that works". Then Received another Email from a different Tech saying he had one in the mail? A little confused but figured I would wait until the part got here.

Well, today got the replacemet part from RCBS and they have a larger case stripper! Old one was .809 in height, new one was just over 1.005". It was also larger in diameter (1.123 vs 1.395)

It was just tall enough to make contact with the base of the press and function properly to remove the case from the swager head!

Here is a picture of the two parts.New part # is 7709489 for anyone who wants one to make it work with a LCT.

RCBS%20lg%20Shell%20Stripper_zpsrbgwexg3.jpg

Once again, very happy with RCBS customer Service!
 
Status
Not open for further replies.
Back
Top