Yankee1986
Contributing Member
- Joined
- Jan 23, 2022
- Messages
- 185
I have a brand new Octane 9. I put in a Griffin Cam-Lok piston and their Plan A adapter.
First 4 shots, perfect, slide cycles, sound was better than I was expecting.
Then 5th shot was noticeably louder so I looked and the spring was stuck compressed.
I have managed move it some but cannot free it.
The manual shows using a screwdriver to twist it out. I sprayed it with CLP and will try again.
I thought there should be some grease on it when I put it together but I couldn't find anything in the manual about lubing the spring and/or piston.
Any tips/tricks to keep this from happening again would be appreciated.
First 4 shots, perfect, slide cycles, sound was better than I was expecting.
Then 5th shot was noticeably louder so I looked and the spring was stuck compressed.
I have managed move it some but cannot free it.
The manual shows using a screwdriver to twist it out. I sprayed it with CLP and will try again.
I thought there should be some grease on it when I put it together but I couldn't find anything in the manual about lubing the spring and/or piston.
Any tips/tricks to keep this from happening again would be appreciated.