-
-
joneb replied to the thread 357mag/158gr powder recommendation.I'm not familiar with Zero bullets, but if you are loading 158 gr XTP I would start with 13.5gr of Accurate #9 for 357 magnum with a... -
joneb replied to the thread Lee Pro 6000 unboxing and testing for OAL consistency.My issue with mixed 9x19 brass is with case wall thickness and neck retention, I can load 9x19 with True Blue and have a ES of 9 fps...
-
joneb replied to the thread Lee Pro 6000 unboxing and testing for OAL consistency.I've never had good results with that approach, I find way to much variation in 9x19 brass to mix them.
-
joneb replied to the thread Lee Pro 6000 unboxing and testing for OAL consistency.Are you loading mixed brass?
-
joneb reacted to borrowedtime69's post in the thread Self defense options for carry on flying in the USA with
Like.
Nevermind, don't want anyone in trouble. :scrutiny::) -
In my opinion, these are two of the very best Smith and Wesson ever produced. Here is a model 29-2 and a no-dash 686. Next to my...
-
joneb reacted to Mk-211's post in the thread Self defense options for carry on flying in the USA with Like.
Legal. 😀
-
joneb replied to the thread Self defense options for carry on flying in the USA.What does CA call a d cell battery outside a sock?
-
joneb replied to the thread Burn Rate Chart Inconsistencies.Some maybe too close to call. Then there is lot variance and testing variance. H-110 and W-296 along with W-231 and HP-38 are said to be...
-
joneb replied to the thread Used Walnut and Corn Media??.What came out of the ground will eventually find it's way back there, back from where it came from more or less. What concerns me is...
-
I am interested in the 32 H&R but I wish the barrel was 2.5 or 3.0 inch long.
-
joneb replied to the thread Anyone used the RMR 135gr 9mm Matchwinners?.I had results with Xtreme 135 gr FP in a XDS 9x19 using Accurate #7 to mimic the 135gr Hornady critical load.
-
joneb replied to the thread Making 45acp Cases from Starline 45 Win Mag.I have trimmed 9x19 mm to load for 9x18 Mak. Not because I'm poor but because I'm cheap, and the brass was in hand. I was short of 44...
-
joneb reacted to ballman6711's post in the thread Making 45acp Cases from Starline 45 Win Mag with Like.
Might want to compare case volume between your 45acp and your 45 Win Mag cases. The "Mag" cases may be thicker and have less interior...
-
joneb replied to the thread Making 45acp Cases from Starline 45 Win Mag.A waist time and good brass IMHO
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…