Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
You are using the old High Contrast theme. We have installed a new dark theme for you, called UI.X. This will work better with the new upgrade of our software. You can select it at the bottom of any page.
I have a S&W 686 CS - 1 revolver. These have the bead blast finish.
I have some shiny spots on it where carrying it has polished the finish.
I read awhile back somewhere, where it could be touched up using an abrasive product like scotch brite, sandpaper, etc, but I cannot remember where I...
I am wondering on these revolvers, if you have to have it re blasted to original, what would one do about the laser etching?
On these finishes, I read a long while ago about someone using a material to touch up shiny spots from carrying them, to match the original finish, but I cannot remember...
As stated above, they are both PC revolvers.
You can get the new one for 900.00 to 1000.00. The new one comes with a plastic performance case. The older one comes with a aluminum performance case.
The older ones were going for 1000.00 up to 3500.00, depending on condition.
With the...
I was talking to some friends the other day, and one of them mentioned the fact of having to use moon clips in some 627's.
I really did not know that you have to use moon clips in any 627.
Can someone fill me in on this. The PC revolvers, like the 8 shot ones, do they take moon clips? Which...
I have a CS40 and when I fire it, it has a definate click in the trigger pull.
Any information on this problem?
I tried to take it down, but I have only done 45's before. Is the take down the same?
Any fixes for this problem?
Thanks in advance.
That is a good point.
I read somewhere that the head space should not over .009 and should be between .003 to .006. Is that correct?
I am still trying to figure out the whole headspace problem and how it is caused.
And the fact of shimming it and what that actually does, (reMoves some of the...
I called Brownells and they could not find the parts. Also checked the web site with nothing found.
Anyone have the part number for these?
Old Fuff - what tools do I need to ream the yoke barrel and square the end?
I called S&W about fixing this under warranty. The guy told me that I cannot...
I need some spacers (shims, bearings) not exactly sure what they are called, for correcting endshake on a Smith and Wesson. I cannot find them anywhere.
Also, what thickness are they available in?
Any information would be appreciated.
I went through the Lady Smith thing about a year ago. I had heard that there were differences in the LS and the standard model.
After a bunch of time, I found out that the only difference is the LS markings on the frame, and the nice grips and the case that it comes in (the older models had a...
I would not be too concerned with the crooked stamping.
It is not really a defective part. As long as it functions properly, it should be fine. I have seen several different brands with the same problem,
If it really bothers you, keep trying to get another.
Thanks for the replies, some good thought information here.
I am going to shoot the heck out of these aluminum rings, and find out if they really will be a problem down the road.
How about a REM 700 SPS.
I just bought one at Dick's Sporting Goods last week.
Has a Matte finish, a dark green synthetic stock (Dicks exclusive), a heavy barrel, and the new Remington trigger system.
Had a 4 x 12 scope (Marked with a R).
All this for 469.00 after 30.00 rebate.
Shoots very good...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.