Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
You are using the old High Contrast theme. We have installed a new dark theme for you, called UI.X. This will work better with the new upgrade of our software. You can select it at the bottom of any page.
Some time ago, our very own "Klausman" wrote an incredible history on powders... specifically, early smokless powder.
His article covers some that I'm sure you will recognize and be surprised at not only how old they actually are, but their transition through the years!
I consider this writeup...
Greetings all! As many of you may recall, I assumed responsibility of StevesPages after Steve passed away, so as not to have the website perish. It is still alive and well.
I am writing this today as an FYI that I am making some changes there in admirable traffic. Of late I have found many...
I finally got a bunch of new manuals and literature posted. Time has been so short of recent.
Rather than editing the menu system each time there is a new manual I get, I've decided to put them in a browsable folder. It's linked off the home page and can be found here...
Mods, please let this ride as I'm sure you know that Steves pages was related.
Steves Pages is down. It has now either been let to expire or perhaps Steve has passed on. In any case, God bless you Steve for the information you collected and published for all!
If you've passed, RIP my...
...some guys on another forum I'm on I've made the following statement.
I'm likely short a bit of info which you'll see.
Thanks for your input!
**********************************************
Addressing accuracy... if you are building for accuracy, you want OAL to be on the long side...
I just acquired a set of 10mm Lee dies so I don't have to reset my dies when going from .40 to 10mm. My press is a 550b.
Not being familiar with Lee stuff, I'm guessing that...
I have a GP100 4" that has a Trijicon front tritium sight. I also has a Glock G22 and it has a Meprolight front sight.
Both are 12-14 yrs old and getting VERY dim. I've been looking at ways (including buying fresh after-market tritium tubes)
to bring these tired warriors back to life...
Three videos of a 500b Dillon in action (short)
Owned this brass feeder since I bought the press.. Never setup until yesterday due to ceiling height. Removed "strong mount" to achieve lowered position.
Please forgive the sideways shot in vid 2 and the stated function of station one as the...
Have a wonderful polish now on trigger parts.
I know what shimming will do as far as tightening tolerance on hammer and reducing scratch marks on the side of the hammer from frame rub...
What else will it give me?
Thanks,
Ex
Just saw this today and called the inventor... he's here in Az. Had a nice chat.
I'm looking at adding his "mrbulletfeeder mini" to my 550b.
Cost about $150 to get setup.
Watch the vie and see what you think. Shows it running on a 1050
https://www.youtube.com/watch?v=ynFXBK6A3Qk
Have an AM derringer with an existing .357 Mag barrel on it that somehow ended up
with a gouge straight down it's length.
Have acquired a replacement barrel for it in .45C/.410.
Question...
These things have a pretty solid pin at it's pivot point. Has anyone ever removed one of these?
I put...
Any body have one of these? I have a really low milage (probably 25 shots) Model 1, in .357 mag from them. I have been unable to contact them. They have a number on the website to the store (disconneted) and no one answers the main number. Rings 6 or 8 times,
then sounds like someone picks...
I have two GPs. 4" blued and 6" SS. Both have DIY trigger jobs. I knew I had gotten the triggers very nice but didn't know how nice until I got to shoot a tuned S&W 686 last week.
Even the 686 owner was amazed that my GP trigger was at least as nice as his!
So I have collected 4 videos that...
Question is about blueing used back then.
Tooling a front sight for this pistol that is mint
except for want of a front sight.
Making new front sight from a piece of
half round key stock. Basic shape is already done.
What solvent/cleaner can I use on this slide without
any risk to...
Got a new pair of unfinished black walnut grips the other day from an ebayer. Got them two days ahead of anticipated delivery. The guy called me before he shipped and said if I had a cell phone he'd send me some pics to choose the grain I wanted. Have to give this seller cudos and post pics...
Ok. Built 30 rounds of .357 mag with SJHP, 125 gn, over a starting load of 18.2 gns 4227.
Definitely a stouter load than those I've built with other powders such as Unique, LongShot, SR4756.
What I am not sure I understand is that they were wildly inaccurate. Couldn't keep them on 8.5"X11"...
Does anyone here have anything they can share on this topic? I know nothing about their handguns. A friend is looking at their 971 .357 mag, 4" barrel, and I told him I'd check if anyone had comments on it. I know they're much less expensive (which is why he's interested) but price does...
I need help guys.
I have owned two Glocks for years now... a Gen2 G22, and a Gen3 G29. Love 'em both and won't part with them. Of course, they just fill their own roll in the stable.
I have done the "25 cent" trigger jobs and it of course smoothed out the take up.
I have read some...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.