Search results for query: *

"I'm obviously not going to need two nice sides, so could someone explain the ratings system?" Plywood that has only one smooth side is called "good one side" If you are going to be laminating and want smooth edges why not use particleboard. Three 5/8th thicknesses will give you a heavy...

Been thinking about pushing a 9mm 125gr. JHP with Titegroup or 800X and looking for some min./max. loads and favorite recipes. Any guidance is appreciated.

I’d like to collect a good sample of OAL’s, by brand, that you guys are seating your 9mm JHP’s. Load data seems to be all over the place and I don’t have a sample of each bullet to compare ogives. As you know, some data cites bullet manufacturer and some just says “JHPâ€. I’m...

Thirties: Sounds like you have everything under control! Thanks for the travel limits, up and down. The Redding Competition Seating dies are definately the way to go.

Thirties: Have you ever used the "zero" adjustment to establish a known OAL benchmark so that you are always adding or subtracting to/from zero?

I've been loading mostly lead and plated and experiment way too much with different loads so I continually get frustrated with limited lead load data and have decided to go with jacketed for awhile. Just about bought some Remington bulk bullets when I checked out Zero Bullets at about 85% the...

-------------------------------------------------------------------------------- I’ve heard good things (especially price) about Zero bullets and thought I would give them a try. I’m loading for my PO1 and with it’s “short throated†characteristic, some bullet designs require deeper...

Thanks to all...exactly what I was looking for...Manufacturer’s data. Timothy

Could anyone steer me to a website containing Vihtavuouri load data? Have no trouble finding other brands, just this company. Thanks

Ping...you said... "At that point could you just add .010 to it and you would be set. Just wondering." I'm sure the word 'add' was just a slip of the toungue but it could get you in trouble. This would put you farther into the lands. You want to 'subtract' .010 Just my $.02

Check out Redding Competition Seating Dies. Little pricey but well worth it for that reason and several others. IMHO

As primitive as it may sound I have been loading several pistol calibers on a single stage press. I want to speed things up a bit but do not want to go progressive. (don’t load enough volume and more $ than I want to spend) Anyway, I was thinking about a turret press which I think would...

The only M-3 and M-6 Lights I can find are either Streamlight or Insight Technologies. Are there other brands? The specs. are pretty much the same but Insight has the best price at Cal’s Armory at $248.00. If you have any knowledge about, or experience with these lights I would certainly...

Vern is correct! Somethings can be done on autopilot while watching TV and it sure makes a boring job go faster. I agree with 100% concentration when it comes to powder. I have a small TV close to my bench and used to keep up to speed on one or more football games when reloading. Note I said...

Caution! Reloading while watching TV can be hazardous to your health

I’ve heard good things about Zero bullets and thought I would give them a try. I’m loading for my PO1 and with it’s “short throated†characteristic, some bullet designs require deeper seating than in other pistols. With this in mind, before I buy a thousand of them, I was hoping some of...

IMR gives 6.3 gr. of 4756 as being max. for 9mm 124 gr. As usual, not much info. for lead bullets is given. I’m using Berry’s 124gr. Plated Flat Point and since this is a first cousin to lead, I am wondering what you consider a safe max charge for this bullet. Out of my P01, 5.0 gr. of 4756...

Realizing that many factors peculiar to individual pistols of the same caliber affect bullet performance and accuracy, I am directing this question to those who load for a 45ACP SS Kimber Compact. I am well aware that performance between pistols of the same manufacturer and model can vary...

Having a brain cramp here! Generally, for a given weight bullet the powder charge is greater for a jacketed bullet than for a lead bullet. Correct? If so, one could use lead data for jacketed but not jacketed data for lead. Agree? Now, my question: Do I use lead or jacketed data for Berry's...

Chicken-Farmer Great program! Here it is. http://glocktalk.com/showthread.php?threadid=78745